Beitz concentrated liquid diversity solutions for wood

Beitz concentrated liquid diversity solutions for wood

Liquid bleach for diversifying wood before varnish – diluted with solvent

Concentrated diversity solutions for natural wood, in natural wood shades for direct application after diluting on the wood or for adding to varnishes to obtain a desired natural wood shade. For application or spraying, quick drying.

Beitz concentrated liquid diversity solutions for wood www.denber-paints.co.il

Shades: pine, light teak, light walnut, brown, dark walnut, red mahogany, dark mahogany, polysander, wenge, black, green, blue, white, red.

Liquid bleach for diversifying wood before varnish - solvent diluted www.denber.net — Liquid bleach for diversifying wood before varnish – diluted solvent www.denber.net

Area preparation:

Thorough cleaning of dust, grease, dirt and loose paint.
Rubbing with glass wool to remove grains and blowing with air pressure.

primary color:

He himself is a foundation.

User manual:

Carefully open the box of spawning solution.
mix well.
Dip a brush and apply a little on wood and check concentration.
If the color is too concentrated, you can dilute as needed with turpentine until you get the desired shade.
The shade varies depending on the shade of the wood. A lighter shade will be obtained on light wood and a darker shade on dark wood.
Each additional layer will add darkness to the final shade that will be obtained.

packing:

0.5 liter, 1 liter, 5 liter.

Beitz concentrated liquid diversity solutions for wood

Liquid bleach for diversifying wood before varnish – diluted with solvent

storage:

In a cool and shady place at room temperature.

Shelf Life:

12 months in the original packaging.

Cleaning dishes :

21-D thinner at the end of painting.

safety:

Not for food, keep out of reach of children.
Flammable, away from heat, fire and sparks.
Ensure adequate ventilation during application.
Wear safety glasses, solvent-resistant gloves, protective clothing.
In case of injury – seek medical attention immediately.

warning:

Do not mix with materials not recommended by us.
Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention.

Quality Inspection:

In the laboratories of our factory according to the specification.
ISO 9001-2015

For the attention of the user:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification is used as a substitute for advice/training by a consultant/authorized guide. It must be applied first on a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read the MSDS safety instructions of the product before starting to work with it.

Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard