Spray Zmigon Tire Renew
Tire renew synthetic rubber
Liquid synthetic rubber coating in acrylic solution for external refresh of used car tire wall appearance. Black synthetic rubber coating spray in acrylic solution for quick, flexible, multi-solid, tire coating with spray and/or smear. Fills capillary cracks in the walls of old tires, beans and gives a new look to the tire. Made in Aerosol 400 ml and thicker solution for professionals in 1, 5, liter packages. Manufactured in accordance with standard 755. Contains flame retardants.
Spray Zmigon Tire Renew
Tire renew synthetic rubber
Features:
- Fast drying liquid rubber suitable for coating to refresh the appearance of old tires.
- Gives a new look for an old tire.
- Very strong adhesion to tires.
- Can be applied in several layers for desired thickness to fill dry cracks with the tire.
- Short inter layered waiting time due to the rapid drying.
- Excellent inter layered connecting ability.
- Contains flame retardants.
- Resistant to heat and cold and extreme weather conditions as well as salty seawater and fresh water.
- Flexible and strong.
- Resistant to scratches and shocks.
- Easy to apply.
- Decorative and gives the tire a fresh new look.
- Excellent power insulating.
Uses:
- Coating used vehicle tires .
Spray Zmigon Tire Renew
Tire renew synthetic rubber
Technical data:
- Theoretical coverage capacity – 1 liter per 8-10 square meters practical consumption per layer of 100 microns – 150 ml liquid rubber per square meter for 100 microns of dry layer (minimum required).
- Recommended number of layers – 1-2
- % solid in volume in a tire can – 60% (T.I.785 Part 17).
- % solids in volume in the aerosol tire – 100 g liquid rubber per 400 ml
- Total volume. 15% solid.
- Color pigment content – 45% (T.I. 785 Part 19)
- Adhesion– Criss cross cut “0” (T.I.P. 785 Part 27 Film 50 mic. 7 drying days)
- Flexibility – 1 mm (sheen) meets israeli standard 935 section 307.
- Grinding – up to 50 microns (T.I.785 Part 15 – up to 60 mcg)
- Density – 1.1-1.2 gm\cm3
- water immersion resistance – no bubbles, No softening, no change in Adhesion, (T.I.935 Section 312)
- Resistance to “bleeding” – no less than level 6 according to ASTM D-868 and ASTM D-969
- Radiation resistance – 1,200 hours in Q-Pannel with UVA-340 lamp in 8-hour light cycles at O60 temperature and 4 hours at O50 temperature, (Tested by ASTM D-4587-91) –
- Gloss loss : 4%
- Resistance to solvents and fuels – Durable according to ASTM D-2792-93
- Viscosity –Room temperature 3.0-3.5 Pa.sec (HAAKE) 110-120 Krebs in 200 rounds per minute after manual mixing of 2 minutes (T.I.935 Section 302), after diluting 10% in the thinner – 85-90 Krebs. After 10 days it is stored at 42ºC – the position will increase to 5 krebs.
- Rigidity – 3 Dg< (Ericsson)
- Abrasion – 120 microns – 850 cycles (Gardner) ASTM, American standard ASTM D4060 dry film thickness 200 microns, weight loss – – 2 g per 500 cycles (device – up to 2.5 g licensed loss) peeling strength – minimum 5 kg per square meter.
- Heat resistance up to 70 °C unchanged in features and deformation.
- Recommended layer thickness – 150 microns wet.
- Flash point – 25OC
Spray Zmigon Tire Renew
Tire renew synthetic rubber
contains:
- Synthetic rubber dissolves
- Fillers
- Acrylic binder, pigments.
- Adhesion enhancers.
- Solvents, additives.
Shade:
- Lightning Black
Gloss:
- Silk , (T.I.935 Section 309).
Dry to touch:
- 10-15 minutes depending on the temperature of the environment.
- Drying time on the wheel – (T.I.935 Section 304 Repair No. 2) – up to 45 minutes
Drying between layers:
- 20 minutes, final: 3-4 hours (depending on the ambient temperature)
Application methods:
- spray with aerosol.
Dilution:
- None.
Spray Zmigon Tire Renew
Tire renew synthetic rubber
Preparation of the area:
- Thorough cleaning dust, fat, dirt, mud, it is recommended to rinse with a oil remover Degreezer Z , rinse with fresh water and wait to dry, to ensure cleanliness of the area before painting.
Packaging:
- 400 ml spray.
Storage:
- In a cool, shady place at room temperature.
- Keep lids tightly closed.
Shelf life:
- 12 months in the original packaging.
Cleaning Tools:
- Synthetic thinner 18-D immediately after painting.
Safety:
- Not edible, out of reach of children.
- Flammable, away from heats, fire and sparks.
- Ensure proper ventilation during application.
- Wear goggles, solidarity gloves, protective clothing.
- In case of injury , seek medical attention immediately.
Spray Zmigon Tire Renew
Tire renew synthetic rubber
Caution:
- Do not mix with materials not recommended by us.
- Do not paint with high environmental heat and it is recommended to paint onion only and late morning and early evening.
- Recommended in heats not exceeding 30 degrees and humidity of up to 50%.
- Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
- In contact, rinse with plenty of running water and seek medical attention.
- Aerosol Spray is a pressure tank, it must be emptied of gas before being thrown in the trash.
- It should not be thrown into the fire. There is a risk of exploding.
Quality audit:
- In our factory laboratories in accordance with iso 9001-2015 specifications
For user attention: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards.
Spray Zmigon Tire Renew
Tire renew synthetic rubber
- Visit our sites: http://www.denber.net
- www.denber-paints.co.il
- www.denber-colors.co.il
- Varnish for wood. How to choose the right varnish for wood
- Thermal isolation Thermoseal 200 energy saving in green construction
- Crystal epoxy resin for tables
- Fire resistance of houses, hardwood and parquet floors, decks
- Sealing the floor of the balcony, terrace from rain
- Thin floor nano-coverings for industrial refrigerators and freezers
- Epoxy floors – Benefits of epoxy floors
- Swelling paints for steel protection against fire – Fire retardant paint
- As part of the restoration of buildings – concrete restoration at the Yad Kennedy site
- Paint for aircraft Denbergloss Jets
- Complicated sealing based on innovative technologies
- Reconstruction project of a unique house (Israeli house of architect Gaudi); Renovation of condominiums
- The work on the floor covering and restoration of the sports hall has been completed
- Denber has developed an innovative solution for thermal insulation works
- Mold, how to remove mold correctly and how to fight mold
- “Sick” buildings – Antibacterial paints destroys viruses / bacteria – Bacterinoll/ Tutgum Bacterinol
- Denber – floor coating using epoxy and polyurethane – find out what is suitable for you epoxy floor or polyurethane floor
- Epoxy floor coating and epoxy paints