Spray Shoes Paint fast dry

Spray Shoes Paint fast dry

Shoes leather paint

SHOES FAST PAINT – fast drying spray paint for renewing old leather of shoes, coats, leather upholstery etc.

Spray Shoes Paint fast dry. www.denber-paints.co.il

Spray Shoes Paint fast dry. www.denber-paints.co.il

Spray Shoes Paint fast dry

Shoes leather paint

Features:

  • Gives you a new look for old leather.
  • Adhesion is very strong to the leather.
  • Can be applied in several layers to fill capillary dry cracks in the leather.
  • Short inter layered waiting time due to the rapid drying.
  • Excellent inter layered connecting ability.
  • Resistant to heat and cold and extreme weather conditions as well as salty seawater and fresh water.
  • Flexible and strong.
  • Resistant to scratches and shocks.
  • Easy to apply in eurosol splash.
  • Decorative and gives the shoe/coat/ leather armchairs a fresh new look.

Uses:

  • For painting shoes of various types.
  • For painting leather upholstery. For painting leather jackets and more………

Spray Shoes Paint fast dry

Shoes leather paint

Technical data:

  • Theoretical coverage capacity – 1 liter per 8-10 square meters
  • Number of layers recommended – 1-2
  • % solids in eurosol volume 400 ml – 100 g liquid paint per 400 ml total volume. 15% solid.
  • Color pigment content – 45% (T.I. 785 Part 19)
  • Adhesion – Criss cross cut “0” (T.I.P. 785 Part 27 Film 50 mik 7 drying days)
  • Flexibility – 1 mm (sheen) meets israeli standard 935 section 307.
  • Grinding – up to 50 microns (T.I.785 Part 15 – up to 60 mick)
  • Density – 1.1-1.2 gm\cm3
  • Resistance to immersion in water – no bubbles, no softening, no change in adhesion, (T.I.935 Section 312)
  • Resistance to “sweating” (bleeding)- No less than level 6 according to ASTM D-868 and ASTM D-969
  • Radiation Resistance – 1,200 hours in Q-Pannel with UVA-340 lamp in 8-hour light cycles at O60 temperature and 4 hours at O50 temperature, (tested according to ASTM D-4587-9 1) –
  • Gloss loss : 4%
  • Resistance to solvents and fuels – Durable according to ASTM D-2792-93
  • Viscosity – Room temperature 3.0-3.5 Pa.sec (HAAKE) 110-120 Krebs in 200 rounds per minute after manual mixing of 2 minutes (T.I.935 Section 302), After dilution 10% in the thinner – 85-90 Krebs. After 10 days it is stored at 42ºC – the juxtaposition will increase to 5 krebs.
  • Rigidity – 3 Dg< (Ericsson)
  • Abrasion – 120 microns – 850 cycles (Gardner) ASTM, American standard ASTM D4060 dry film thickness 200 microns, weight loss – 2 g per 500 cycles (device – up to 2.5 g licensed loss)
  • Exfoliation strength – minimum 5 kg per square meter.
  • Heat resistance up to 70°C unchanged in features and deformation.
  • Recommended layer thickness – 150-100 microns wet.
  • Flash point – 25OC

Spray Shoes Paint fast dry

Shoes leather paint

Contains:

  • Fillers.
  • Solvent.
  • Resins,
  • Pigments.
  • Adhesion enhancers.
  • Additives.

Shade:

  • black, light brown, dark brown, white, grayish, yellowish cream, and more…..

Gloss:

  • Silk , (P.I. 935 Section 309).

Drying to the touch:

  • 10-15 minutes depending on the temperature of the environment.
  • Drying time on the wheel – (T.I.935 Section 304 Correction No. 2) – up to 45 minutes
  • Drying between layers: 20 minutes, Final: 3-4 hours (depending on the environmental temperature)

Spray Shoes Paint fast dry

Shoes leather paint

Application methods:

  • Aerosol spray in splash.

Preparation of the area:

  • Thorough cleaning dust, mud, fat, dirt, it is recommended to rinse with a degreezer Z and rub with a cleansing brush to remove fats if any, rinse with fresh water and wait to dry, to ensure cleanliness of the area before painting.
  • If silicone-sprayed leather upholstery has been sprayed in the past, acetone or alcohol should be cleaned.

Packaging:

  • 0.4 liter spray container.

Storage:

  • In a cool, shady place at room temperature.
  • Keep lids tightly closed.

Spray Shoes Paint fast dry

Shoes leather paint

Shelf life:

  • 12 months in the original packaging.
  • Cleaning tools and dirt created: Synthetic diluter 18-D immediately after painting.

Safety:

  • Not edible, out of reach of children.
  • Flammable, away from heats, fire and sparks.
  • Ensure proper ventilation during application.
  • Wear goggles, solidarity gloves, protective clothing.
  • In case of injury , seek medical attention immediately.

Caution:

  • Do not mix with materials not recommended by us.
  • Do not paint with high environmental heat and it is recommended to paint onion only and late morning and early evening.
  • Recommended in heats not exceeding 30 degrees and humidity of up to 50%.
  • Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
  • In contact, rinse with plenty of running water and seek medical attention.
  • Pressure tank, empty before tossing. Do not throw into the fire – may explode.

Spray Shoes Paint fast dry

Shoes leather paint

Quality audit:

  • In our factory laboratories in accordance with iso 9001-2015 specifications.

For user attention:

  • This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards

Spray Shoes Paint fast dry

Shoes leather paint