Spray Marine top coat paint

Spray Marine top coat paint

For boats, marine motorcycles

Fast drying, protecting paint from sea water contact, sealing coat, up the sea water level areas.

Spray Marine top coat paint www.denber-paints.co.il

Spray Marine top coat paint www.denber-paints.co.il

Spray Marine top coat paint

For boats, marine motorcycles

Features:

  • Very fast drying, suitable for painting in a marine atmosphere and during sailing.
  • Strong abrasion resistant.
  • Isolation and prevents seawater from touching the hull.
  • Suitable for maintenance and repair work as soon as the ship’s color impact event happened. as well as ongoing maintenance for walls and railings.
  • Very strong adhesion capacity for the paint layers present in the vessel as well as any visible infrastructure such as steel, fiberglass, aluminum, wood, etc.
  • Fast drying can be applied in several layers for desired thickness for prolonged protection.
  • Short inter layered waiting time due to the rapid drying.
  • Excellent inter layered connecting ability.
  • Resistant to heat and cold and extreme sea conditions in salty seawater and fresh water.
  • Flexible and strong and suitable for vessel conditions in seawater and fresh water for many years and to the characteristic shocks to which the vessel receives.
  • Easy to apply in a splash.
  • Drying up quickly. 4 layers of 100 microns can be applied one at a time for durability of 3 years or more. .

Spray Marine top coat paint

For boats, marine motorcycles

Uses:

  • Painting maintenance of all types of vessels small and large made of steel, fiberglass, aluminum, wood, etc. in parts above sea level and inside the various ship rooms.
  • For the painting of yachts, toweds, router and service boats, barges, race and fishing boats, fishing and cargo ships, passenger ships and cargo ships, etc.
  • For painting electrical cabinets on the outside.

Technical data:

  • Practical consumption per layer of 100 microns – 150 ml of color per square meter for 100 microns of dry layer (minimum required).
  • Recommended number of layers – 1-3
  • % solid in volume – 66% (T.I.785 Part 17).
  • Color pigment content – 65% (TA 785 Part 19)
  • Flexibility – 1 mm (sheen) meets the examination of Israeli standard 935 section 307.
  • Grinding – up to 50 microns (T.I.785 Part 15 – up to 60 mick)
  • Water immersion resistance – no bubbles, No softening, no change in Adhesia, (T.I.935 Section 312)
  • Resistance to “bleeding” – no less level 6 according to ASTM D-868 and ASTM D-969
  • Hardness – 3 Dg< (Ericsson)
  • Abrasion – 120 microns – 2300 cycles (Gardner) ASTM, American standard ASTM D4060 dry film thickness 200 microns, Weight loss – 2 g per 500 cycles (device – up to 2.5 g licensed loss) peeling strength – minimum 5 kg per square meter.
  • Heat resistance up to 70 °C without change in features and deformation.
  • Layer thickness is recommended for proper wear resistance – from 150-180 microns wet.
  • Flash point – 25OC

Spray Marine top coat paint

For boats, marine motorcycles

Contains:

  • Marine special acrylic that fits for this purpose.
  • Fillers
  • Chlorinated rubber, pigments.
  • Special flex materials.
  • Solvents, additives.

Shade:

  • Standard white, standard blue, and in every shade of the order

Gloss:

  • Matte up to 18%, (T.I.935 Section 309).

Drying to the touch:

  • 10-30 minutes depending on the temperature of the environment. Drying time on the wheel – (T.I.935 Section 304 Amendment No. 2) – up to 45 minutes.
  • Due to the fact that the paint is of the acrylic type to dry quickly, if over spray “dust” is created during spraying, that is, the paint dries in the air before reaching the painted surface of the vessel, which should be reached wet, the painting process must be stopped immediately, since the color accumulates on the surface painted as dry grains and these will fall out together with all layers even those that will follow on the first voyage. To prevent over spray, a number of actions should be taken: 1. Work at an environmental temperature as much as 15-30 degrees as possible even if it is necessary to paint only in the mornings or evenings. Reduce the splash pressure and work closer to the hull 20-25 cm for a gentle, uniform color mist that lands completely wet on the painted area.

Spray Marine top coat paint

For boats, marine motorcycles

Drying between layers:

  • 30 minutes, Final: 1-3 hours (depending on the temperature of the environment)
  • Income into water: as soon as dry for fingerprinting.

Application methods:

  • spray container spray.

Preparation of space:

  • Thorough cleaning of the paint layer on which dust, fat, dirt, fresh water is painted and waiting to dry, to ensure that the area is cleaned before painting.

Packaging:

  • 0.4 liters.

Storage:

  • In a cool, shady place at room temperature.

Spray Marine top coat paint

For boats, marine motorcycles

Shelf life:

  • 12 months in the original packaging.

Cleaning Tools:

  • Thinner 18-D immediately after painting.

Safety:

  • Not edible, out of reach of children.
  • Flammable, away from heats, fire and sparks.
  • Ensure proper ventilation during application.
  • Wear goggles, solidarity gloves, protective clothing.
  • In case of injury , seek medical attention immediately.

Caution:

  • Do not mix with materials not recommended by us.
  • Quality results are obtained only when all layers have been applied as specifications. Any deviation from the specification is at the user’s responsibility.
  • Do not paint on wet or damp to the touch, it is recommended not to paint with very high environmental heat, and it is recommended to paint onion and late morning and early evening.
  • Recommended in a heat not exceeding 30 degrees.
  • Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
  • In contact, rinse with plenty of running water and seek medical attention.
  • At the time of spraying, cover areas that do not want to be painted.
  • The color is difficult to remove after drying.
  • If a color that is sprayed on areas should be removed by mistake – clean immediately with acetone dipped in a dry cloth cloth.
  • Plastic dispensers should be cleaned immediately with alcohol soaked in a cloth cloth.

Spray Marine top coat paint

For boats, marine motorcycles

Quality audit:

  • In our factory laboratories in accordance with iso 9001-2015 specifications

For user attention:

  • This technical specification is for general non-binding information only.
  • The product is a professional product for professionals only who have already acquired previous experience in its implementation.
  • . This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards.

Spray Marine top coat paint

For boats, marine motorcycles