Styrofoam glue

Styrofoam glue

Powerful glue for gluing polystyrene boards

Powerful for gluing styrofoam panels to any infrastructure

Styrofoam glue www.denber-paints.co.il

Denber styrofoam glue, a thick adhesive paste for gluing styrofoam and polyphen panels to the walls of underground buildings to prevent damage to stones in the sealing while covering with soil, and for cold rooms for thermal insulation to prevent cold “escape”. Thick enough to be applied in a thick and thin layer as needed. Suitable for gluing Styrofoam boards to bitumen.

Storage:

In a cool and shady place at room temperature.
Make sure the lids are tightly closed to prevent the glue from drying out.

Shelf Life:

12 months in the original packaging.
Mineral turpentine or 18-D thinner at the end of painting.

Powerful for gluing styrofoam panels to any infrastructure

Safety:

Not for food, keep out of reach of children.
Flammable, away from heat, fire and sparks.
Ensure adequate ventilation during application.
Wear safety glasses, solvent-resistant gloves, protective clothing.
In case of injury – seek medical attention immediately.

Warning:

Do not mix with materials not recommended by us.
Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention.

Quality Inspection:

In the laboratories of our factory according to the specification.
ISO 9001-2015

For the attention of the user:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification is used as a substitute for advice/training by a consultant/authorized guide. It must be applied first on a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read the MSDS safety instructions of the product before starting to work with it.

Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard