Polyplex transparent one-component primer

Polyplex transparent one-component primer

Quick-drying transparent primer for concrete, polyethylene, plastic, nylon

Suitable for the following infrastructures:

Acrylic (PMMA)
Acrylonitrile Butadiene Styrene (ABS)
Cellulose acetate (CA)
High Impact Polystyrene (HIPS)
Polyphenylene Oxide (PPO)
Polysulfone (PSU, PES, PPSU)
Polyester (PET, PBT, PCL, PEA)
Rigid Polyvinylchloride (PVC)

Extremely strong, has an elongation coefficient, has a very strong adhesion to infrastructures to which normal primers do not adhere. Suitable as a foundation for nylon and plastic, ceramics and porcelain, Teflon, stainless steel, polypropylene, marble and granite and more..

Polyplex transparent one-component primer www.denber-paints.co.il

POLYFLEX PRIMER CLEAR FOR POLYETHYLENE, POLYPROPYLENE, TEFLON hybrid one component reactive siloxane and pu primer, with adhesion promoter provides high bonding demands

Characteristics:

Flexible and strong and 100% stretchable.
Excellent adhesion to infrastructures that are difficult to paint with a particularly high sliding coefficient.
The strength of its adhesion allows the continuation of painting with top colors.
Easy to apply and dries quickly.

uses:

As an element that improves the adhesion of adhesives in the electronics industry.
As a binding element for gluing plastic, nylon, plastic products and fiberglass.
And a primer for the color of glass, ceramics, porcelain, granite, marble, stainless steel, etc.
And a foundation for painting polyethylene products such as piping, accessories, nylon, packaging, etc.
As a foundation for painting polypropylene as containers, piping, and packaging, etc.
As a foundation for painting and marking on Teflon.
And a foundation for painting rubber and rubber products of all kinds.
and foundation for expansion seams in concrete

Quick-drying transparent primer for concrete, polyethylene, plastic, nylon

Technical data:

Theoretical coverage – 1 liter per 5 square meters.
Recommended layer thickness – 30 microns
Flexibility – 1 mm (sheen)
Elongation – 100% <
Density – 0.9-1.1 gm/cm ³
Viscosity – 150 cps (Brookfield)
Stiffness – 3 Dg (Ericsson)
Adhesion capacity – 620 kg/cm2
Abrasion – 120 micron – 1500 cycles (Gardner) ASTM

containing:

A hybrid mixture.
dilute
Deep penetration enhancers.
adhesion enhancers.
additives.

variety:

Clear.

Lightning:

silk.

Touch drying :

20 minutes, final – 3 hours, final difficulty – 7 days.

Drying between layers:

4-24 hours depending on the ambient temperature. Fingerprint check.

Application methods:

brushing, scrolling,
Spray very carefully – the material is sensitive to moisture. Moist air from the compressor in the spray will spoil the material and/or reduce the strength of its adhesion to the infrastructure.

Dilution:

Ready to use.

Quick-drying transparent primer for concrete, polyethylene, plastic, nylon

Area preparation:

Thorough cleaning of dust, grease, dirt and loose paint.
It is recommended to go over the area with a cloth dipped in acetone to remove silicone residues from the production.
Polishing with sandpaper where possible is recommended.

packing:

1 liter, 5 liters, 18 liters.

storage:

In a cool and shady place at room temperature.
Make sure lids are tightly closed. Moisture polymerizes. From the moment the lid is opened, it is recommended to finish using all the material in the package.

Shelf Life:

6 months in the original packaging.

Cleaning tools:

Thinner 11-D at the end of painting. and

safety:

Flammable, away from sources of fire. and
Not for food, keep out of reach of children. and
Ensure adequate ventilation during application. and
Wear safety glasses, solvent-resistant gloves, protective clothing. and
In case of injury – seek medical attention immediately. and

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard.