Industrial nylon remover

Industrial nylon remover

Gel liquid for softening and removing nylon stuck from surfaces

Concentrated strong liquid, removes nylon and types of polyethylene through chemical attack, for industrial uses. Dissolves and softens nylon types and allows easy removal.

POLYETHYLENE REMOVER – Industrial softener and remover for polyethylene

Industrial nylon remover. www.denber-paints.co.il

Characteristics:

Polyethylene nylon softener and remover for all types for general use in industry.
Attacks the polyethylene and dissolves it.
Has penetration and dissolution capacity.

uses:

To remove nylon from surfaces and products to which it sticks and cannot be easily removed.

User manual:

It is mandatory to work with chemical gloves, a protective mask for the face and eyes and clothes made of polypropylene.
Gently spread the nylon remover on the areas of the nylon to be removed, wait for it to soften and shrink and rinse with water.

Technical data:

Density – 1.5-1.6 gm/cm ³
Viscosity – 15 seconds #2

containing:

phosphates and silicates.
Alcohols, solvents.
Emulsifiers.
soapy materials.
surfactants.
Detergents.

Gel liquid for softening and removing nylon stuck from surfaces

variety:

transparent yellow

Application methods:

spraying
brushing

Dilution:

without dilution

packing:

5 liters, 18 liters.

storage:

In a cool and shady place at room temperature with adequate ventilation.
Make sure that the lids of the material packages are tightly closed.

Shelf Life:

24 months in the original packaging.

Cleaning tools:

water.

safety:

Caution – alkaline material. Avoid any contact with the hands and other parts of the body.
Combustible, away from heat sources, open fire and sparks.
Not for food, keep out of reach of children.
Ensure adequate ventilation during application.
Wear safety glasses, chemical resistant gloves, protective clothing.
In case of injury – wash immediately with running water and immediately seek medical treatment.

warning:

Do not mix with materials not recommended by us.
Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention.
Long exposure causes abnormal dryness and skin irritation, should be treated as a burn with suitable ointments.

Quality Inspection:

In the laboratories of our factory according to the specification. and
ISO 9001-2015 and

For the attention of the user:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification serves as a substitute for advice/training by a consultant/authorized guide . It must first be applied to a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read the product’s MSDS safety instructions before starting to work with it. f

Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard and