High voltage grease HVG

High voltage grease HVG

Synthetic grease for high voltage circuit breakers to prevent friction and electric arc.

High voltage grease solution

High Voltage Grease HVG www.denber-paints.co.il

High Voltage Grease HVG www.denber-paints.co.il

A thick synthetic grease solution for application, for grinding and preventing friction and seizing of moving contactor parts, seals and protects from the passage of moisture for resistance to high heat and effort. Resistant to high temperatures, resistant to high voltage, resistant to wear over time. 100% solids. HIGH VOLTAGE GREASE – synthetic lubricant for high voltage current circuit breakers to reduce wear and arcing. 

Characteristics:

  • Grease lubricates, prevents parts of high voltage circuit breakers from wearing and seizing.
  • Prevents an electric arc.
  • Prevents the development of corrosion in contacts that creates resistance and normal current flow.
  • Resistant to high voltage and large electric currents.
  • Very long life with hard work.
  • Prevents wear and corrosion and extends the life of electrical contacts.
  • Seals and prevents the passage of moisture.
  • Resistant to high temperatures.
  • Abrasion resistant.
  • Extremely high sliding coefficient.
  • One component is easy to use.
  • Easy to apply.
  • Stable and does not break down into a liquid even after a very long storage time.
  • Does not dry out. Can be easily removed with a cloth dipped in turpentine or thinner.

uses:

  • Main circuit breakers in turbo rooms.
  • High voltage contactors in the industry.
  • Sealing of accumulation strips to prevent contact with moisture and the development of corrosion.
  • Suitable for copper, aluminum and other metals.
  • Movable joints in robotics systems.
  • For the electrical industries for insulation against high voltage breakdowns of insulators.
  • For sealing moisture in parts of electrical panels.

High voltage grease solution  

Synthetic grease for high voltage circuit breakers to prevent friction and electric arc

Technical data:

  • Viscosity – 125-150 Krebs
  • Recommended layer thickness – < 150 microns
  • Flexibility – 1 mm (sheen)
  • Density – 0.9-1.0 gm/cm 3 
  • % solids by volume – 100%
  • Electrical resistance – x 1.2 x 10 15  Ω/cm 3   
  • Breakdown voltage – 10 mil interval – 300 volts per mil
  • Adapted to  Mil Std. 8660 

 containing:

  • HT synthetic oils.
  • authorize
  • additives.

variety:

  • Creamy white.

Application methods:

  • Apply with a brush.

User manual:

  • Clean the surface thoroughly to remove any dust, dirt, oil, grease first. The surface must be completely dry.
  • Open the box and apply with a brush or a flexible plastic tool the required amount on the treated area. Apply well from all directions for complete sealing and to prevent moisture penetration.
  • Apply a layer of at least 150-200 microns.

Dilution:

  • without dilution.

packing:

  • 0.5 liter, 1 liter, 2.5 liter, 5 liter, 18 liter.

High voltage grease HVG

High voltage grease solution  

Synthetic grease for high voltage circuit breakers to prevent friction and electric arc

storage:

  • In a cool and shady place at room temperature.
  • Make sure the lids are tightly closed.

Shelf Life:

  • 24 months in the original packaging.

Cleaning tools:

  • Acetone, tinner 21, tinner 4/100

See  Electrically Conductive Grease Antistatic Anticorrosive

See  silicone grease for high heat up to 300 degrees

This technical specification is for non-binding general information only. 

To the new website: http://www.denber.net

Synthetic grease for high voltage circuit breakers to prevent friction and electric arc