Epoxyden Glue Construction Glue for ceramic, granite, tiles to walls

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Epoxyden Glue Construction Glue www.denber-paints.co.il

Epoxy powerful, 100% glue, two components, for vertically and horizontally gluing of ceramic tiles and porcelain and stone cladding of various types, the infrastructure Concrete Block Black, plaster cement, natural stone, etc. Suitable for cladding interior and exterior, flooring and panels. Gluing of non-ferrous metals, aluminum, glass, wood, marble, etc, with no smells and no solvents.

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Properties::

Exceptionally strong adhesive capacity.
100% solids – contains no water or thinners.
No need to hold in pressure until the final drying.
High pressure endurance and load capacity.
Spread workable and comfortable.
Easy to apply and dries quickly.
Resistant to moisture and humidity conditions, resistant to chemicals and fuels and lubricants.

Applications:

Suitable for a gluing ceramic cladding tiles , porcelain and granite walls and floors .
Gluing of panels.
Suitable for gluing on concrete, black block, plaster.
To paste parts of ferrous metals including aluminum and cement and other elements in the building.
Concrete Pipe repairs a cracked / broken.
Gluing of linoleum, PVC, and more.
Gluing of spiny steel building additions.
Anchoring of steel rods and screws.
Gluing elements of wood floors.
Fill holes and spacious concrete and others.
Anchoring machinery manufacturing floor.
Hallmark glass aluminum and others.
Gluing of stainless steel parts including iron and glass to stainless steel.

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Technical Data:

Average consumption – 3 liters per 1 sq. m at a thickness of 3 mm.
Density of -1.9 + 0.2 gm \ cm3.
Viscosity – 20,000 cPs (Brookfield).
Hardness – >10 Dg (Erichsen).
Mixing ratio – 1:1 by weight, so does by volume almost 1:1 (recommended to mix perfectly part A with part B to avoid errors).
Erosion – 120 micron – 5500 cycles (BYK Gardner) ASTM.
Recommended film thickness – at least 3 mm and without limiting thickness.
The number of layers is recommended – one thick layer.
Pot life -working with the mixture A+B – 20-30 minutes at 10-30 °C environmental temp..
Tensile strength – 25MPa>
Shear strength -> 20 MPa
Tensile strength pull off – 12MPa>
Bending resistance – 16 MPa
Compressive strength – 85 Mpa

Contains:

Epoxy resins.
Fillers, pigments.
Special flex materials.
Materials depth penetration and adhesion enhancers.
Thixotropic additives.
Amine hardeners and accelerators.

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Color:

Produced in a variety of colors – will diversify concrete, white, gray, Beijing natural, red brown, black, and more ….

Gloss:

Mate.

Touch-drying time:

4 hours, final walk – 24 hours, difficulty Final – 7 days.

Recommended application methods:

Scatter with serrated bar or serrated fork lift.
Spatula

Dilution:

Do not dilute.

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Surface Preparation:

Thorough cleaning dust, grease, dirt and loose particles. If there is still oil patterns on the concrete, apply- Detergent grease remover and rub with coarse brushes and rinse with water ( 24 hours drying before starting gluing).
New concrete – at least 30 days after casting, polish with rough diamond stones to remove bumps, nails and binding metal wires. Sand surface till removing some of the accumulated cement concrete. This top cement layer is weak and can be detached.
Old Concrete – Removal with diamond polishing crumbles layer until a solid foundation.
Block/Plasterboard – have to put together a stainless steel mesh anchored to wall before implement tiles gluing.
Salty atmosphere and / or chemical – rinse well with high pressure water and wait to dry fully before starting the finishing touch.
Fill holes and constructive cracks after expanding and deepening the crack.

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Instruction for use:

Part A and Part B are provided in separate containers.
It is recommended to work with the glue at temperatures of 20-30 degrees. If colder – we recommend inserting the cartridge package to room temperature before mix them..
Pour the contents of the containers to larger tank and stir well with slow mechanical stirrer for 5 minutes for a uniform solution . Imperfect mixing glue will not dry out and will need to be removed and re-glue. The mixture should be transferred to another container and then mix again before start gluing. ( Do not use glue directly from the tank which was mixed due to the remaining un mixed components on the walls of the mixing tank and will not able to dry up because of that)
Pour / spread the mixed glue on the paste area (surface) and spread an even layer with a spatula or comb spatula. Alternatively for partial gluing to have air gaps for thermal insulation reasons, pour glue in 4-5 points of the tile area of about 10-20 % of the tile and banging with a rubber hummer to make the desired height. Should be left between the tiles fugues of at least 3 mm. Glue excess remissions while banging, wipe immediately.
Alternatively – put the tile on the paste and move with pressing roller and pin and tightened uniformly dispersed evenly pressing the adhesive to the tile surface for adhesion desirable.
If gluing on wet cement – the surface must be painted before with Epoxyden 450 primer layer for wet surfaces.
If glue uneven stones with vary intervals, you can add stone fragments into the paste, bridging the gap or provide rubble, but see that they fully coated with the glue.

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Packaging A+B:

0.5+ 0.5= 1, 1+1=2, 2.5+2.5=5, 5+5=10

Storage:

Cool and shaded place at room temperature with appropriate ventilation.
Keep lids hermetically sealed.

Shelf Life:

12 month in original sealed package.

Tools cleaning:

Thinner D- 21or D-4/100 at the end of painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.

Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Epoxyden Glue Construction Glue

For gluing ceramic and granite tiles to concrete walls and floors

Warnings:

Don’t mix the product with materials which were not recommended by us.
Don’t apply if the temperature is under +7°C.
and Don’t apply if humidity is over 80%
When applying with Airless, do not aim it at anybody a direct hit could be fatal at pressures over 150 atm.
Read thoroughly the technical data of the product listed in this section; confirm that everything is understood completely, for clarification contacts our tech. department.
All information that is listed in this content is a recommendation merely and cannot be applied in the court of law.
The costumer must test & check that this product is compatible with his equipment and needs.
The information listed in this section is according to the laboratory conditions (temperature, humidity etc.) which the products were tested.
and The recommendations listed do not hold any responsibility for this product.
Theoretical and actual coverage area are different concepts, the actual coverage is affected by the required thickness of the layers, required number of layers, painting conditions including the amount of paint which spread in the air before touching the surface.
The information listed in this section is based on experience and accumulating data, Denber inc., has the right to change the information listed at any time.
Paints that have been in stagnation or exposed to air more than needed could have their qualities changed.

Epoxyden Glue Construction Glue