Epoxy gup tiles remover

Epoxy gup tiles remover

Suitable for floor and walls for removing epoxy in tiles gaps.

Removal epoxy filler in tiles – suitable liquid for the floor and walls for removing epoxy from gaps in tiles.

Alkaline active liquid for removing epoxy gaps filler in floor tiles. For use with chemical resistant gloves and a face mask.

– GROUT EPOXY REMOVER KK – high performance remover liquid

Has particularly strong and penetrating surfactants, which manage to penetrate through the epoxy layers, soften and dissolve them and remove them. The material is not suitable for contact with bare hands, is dangerous in contact with the skin and eyes, emits toxic gases and requires proper ventilation, and is for use by professionals only .

Epoxy gup tiles remover. www.denber-paints.co.il

Characteristics:

Extremely strong and dissolves epoxy gun.
Fast and efficient and leaves many clean fumes.
Does not affect aluminum.
Easy to apply.
Economical.
Suitable for industrial use by professionals only.
The mass capacity is extremely high.

uses:

To remove epoxy gun from the floor. Can be gently poured directly or on a cloth soaked in a material that will not spread.
To remove epoxy gun from walls. With thick chemical gloves soak a cloth and attach to the gun and wait for it to soften. Or add Cabosil powder for certification and apply with a brush.

Technical data:

Immersion time – 5-10 minutes.
Density – 1.1-1.2 gm/cm ³
Viscosity – 13 seconds #4
Acidity – 11-13

Suitable for floor and walls for removing epoxy quarter in fumes

containing:

soapy materials.
Strong epoxy solvents.
Solvents.
surfactants and penetrants.
additives.

variety:

Yellowish brown.

Application methods:

When applying to the rifle with a brush, it is better to place a cloth dipped in the material on the rifle.

Dilution:

Not for dilution.

User manual:

Open carefully with thick chemical gloves and a face mask.
Dip a cloth in the material and place it on the rifle. You can add material to the fabric to speed up the operation.
Wait for it to soften and remove the gunk with a screwdriver or a narrow spatula.
Caution The body must be protected from direct contact. Burns and causes a chemical burn.

packing:

1 liter, 5 liters.

Suitable for floor and walls for removing epoxy quarter in fumes

storage:

In a cool, ventilated and shaded place at room temperature.
Make sure the lid is tightly closed.

Shelf Life:

12 months in the original packaging.

Cleaning tools:

Wash thoroughly with water.

safety:

Toxic, not for food, not for contact in any part of the body – causes severe chemical burns and removal of the skin. out of reach of children. An eye injury can make you permanently blind.
It is not flammable, but in prolonged contact with aluminum parts, flammable hydrogen gases emitted from the material can be formed. Therefore, do not approach the material with a lit cigarette. Away from sources of heat, fire and sparks.
Ensure adequate ventilation during application.
Wear safety glasses, gloves resistant to solvents and corrosive materials (long PVC gloves with inner fabric armor), protective clothing (PVC apron).
In case of injury – wash with plenty of water and seek medical attention immediately.

warning:

Do not mix with materials not recommended by us.
Avoiding contact with the skin and eyes, causes severe chemical burns.
Avoid inhaling the vapors of the substance – serious internal damage is possible.
In case of contact, wash with plenty of running water and seek medical attention immediately – treat as a burn.

Quality Inspection:

In the laboratories of our factory according to the specification.
ISO 9001-2015

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard