Emulsifying cooling oil

Emulsifying cooling oil

Dilute with water for cooling and lubrication

Machining – emulsifying oil to mix with water for cooling during machining

Concentrated emulsifying transparent emulsion oil for cooling metals of all kinds during drilling, machining, engraving, sawing, etc. Ready to use with appropriate dilution in water.

COOLING OIL EMULSION – clear oil to mix with water

Emulsifying cooling oil www.denber-paints.co.il

Characteristics:

Concentrated transparent cooling oil, to add water before use.
Easy and convenient to apply.
Reduces friction during use, prevents heating of the metal and the processing accessory.
Prevents overheating and breakage of tools: the drill, the saw, the engraving knife.
Economical.

uses:

Lubrication and cooling of metals during machining.
Lubrication and cooling of metals during drilling and/or sawing.
Suitable for steel, cast iron, aluminum, stainless steel, copper, bronze.

Technical data:

Density – 0.8-1.0 gm/cm ³
Viscosity – 60-80 s (Brookfield)
Flash point – ^O C 70 close cup, ^O C200 open cup

containing:

Fat.
Emulsifiers.
Preservatives.
Corrosion inhibitors.

Dilute with water for cooling and lubrication

variety:

transparent yellow

Application methods:

Dilution with water.

Dilution:

water.

User manual:

Mix 5-20% oil with water in a desired ratio of 80-95% water.
Grinding and engraving about 5% oil and the rest water, for strenuous and prolonged work up to 20% oil and the rest water.

packing:

18 liters.

storage:

In a cool and shady place at room temperature.
Make sure the lid is tightly closed.

Shelf Life:

48 months in the original packaging.

Cleaning tools:

First water, then turpentine after use.

Dilute with water for cooling and lubrication

safety:

Not for food, keep out of reach of children. and
Flammable, away from heat and fire. and
Ensure adequate ventilation during application. and
Wear safety glasses, solvent-resistant gloves, protective clothing. and
In case of injury – seek medical attention immediately. and

warning:

Do not mix with materials not recommended by us. and
Avoid contact with skin and eyes, causes skin irritation. In case of contact, wash with plenty of running water and seek medical attention. and

Quality Inspection:

In the laboratories of our factory according to the specification. and
ISO 9001-2015

Dilute with water for cooling and lubrication

For the attention of the user:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification serves as a substitute for advice/training by a consultant/authorized guide . It must first be applied to a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read the product’s MSDS safety instructions before starting to work with it. f

Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard