Dypalon Teflon Kit for renewal of Teflon coating

Dypalon Teflon Kit for renewal of Teflon coating

Liquid Teflon for renewing an old coating

A kit for renewing the Teflon coating of scratched and old pans and pot coasters

  • Price: Kit – 86.50 NIS – total 86.50 NIS including delivery by mail, plus 40 NIS with courier to the house, total 126.50 NIS.
  • Return: This product cannot be returned once opened.
  • You can pay with any credit card
Diflon Teflon Teflon coating renewal kit www.denber.net
Diflon Teflon Teflon coating renewal kit www.denber.net

Characteristics:

  • Provides a smooth non-stick coating for frying, baking and cooking utensils.
  • Allows frying without or very little oil.

uses:

  • For coating the interior of cooking, frying and baking utensils, grill grids, for renewing old and scratched Teflon coating.

Technical data:

  • Recommended maximum wet layer thickness per layer – 20 microns
  • PH – 8-10

 variety:

  • Standard black.
  • Green to order.

Application methods:

  • Apply in any way – brushing, spraying.

Dypalon Teflon Kit for renewal of Teflon coating

Liquid Teflon for renewing an old coating

Instructions for use:  (for example – scratch pan)

  • Wash the pan thoroughly with soap and water and scrub hard with Stoch Bright to remove any possible dirt. Rinse well with water, and wipe with a clean, dry towel.
  • Using the glass paper attached to the blister kit – polish well and firmly the bottom of the scratched pan, rinse with water and wipe and dry.
  • Carefully open the bottle of  “Deeplon Black Foundation ” and drip a few drops into the center of the pan. With the rubber wiper attached to the blister kit – quickly apply (to prevent dehydration which prevents continuous application) a very thin and uniform wet layer. (Rinse the wiper with water and wipe) Place on gas over medium heat for 10-15 minutes until the coating becomes matte black and dry in appearance and no longer emits heating fumes. Remove from gas and allow to air cool.
  • Carefully open the bottle of  “Dyflon Upper Gray “, drip a few drops again into the center of the pan and quickly apply (to prevent drying which prevents the application of a continuous and uniform layer) with the rubber squeegee a thin and uniform wet layer. Place on the gas over high heat for 10-15 minutes. The coating will first turn whitish and later turn completely black and be smooth and uniform. Heat until the entire surface becomes black and if necessary, you can move the pan over the center of the flame for proper heating. Remove from gas and allow to air cool.
  • Wash with soap and water with a soft sponge to prevent scratches. The pan is ready for frying .

Liquid Teflon for renewing an old coating

 packing:

  • Large packages: 1 liter, 2.5 liters, 5 liters, 18 liters – for a void order. 08-9960794
  • 705022 – 1 liter Diplon primer black/green – NIS 320 including VAT
  • 705043 – 1 liter Diaflon upper grey/transparent green – NIS 320 including VAT
  • 705122 – 2.5 liter Diplon primer black/green – NIS 700 including VAT
  • 705025 – 2.5 liter upper diplon gray/transparent green – 700 NIS including VAT
  • 705123 – 5 liter Diplon primer black/green – 1340 NIS including VAT
  • 705125 – 5 liters Diaflon upper grey/transparent green – 1340 NIS including VAT

Liquid Teflon for renewing an old coating

Cleaning tools:

  • water

For the attention of the user:

This technical specification is for  non-binding general information only. 

Liquid Teflon for renewing an old coating