Clear epoxy glue

Clear epoxy glue

Powerful epoxy glue, 100% solids, two components

For vertical and horizontal gluing of plastic, fiberglass, glass, cladding, sponges, aluminum, iron, wood, tiles, stone, cladding stones and more… on any infrastructure. Odorless and solvent-free.

EPOXDEN CLEAR GLUE – For universal gluing of plastic, glass, wall covering tiles, sponges, aluminum, iron, wood, tiles, stone tiles etc.

Clear epoxy glue www.denber-paints.co.il

Characteristics:

Very strong adhesion.
100% solids – does not contain water or thinners.
There is no need to hold the tile under pressure until the glue dries.
High resistance to pressures and heavy loads.
Workable and easy to apply.
Easy to apply and dries quickly in a thick layer.
Resistant to wet and humid conditions, resistant to chemicals and fuels and oils.

uses:

Suitable for gluing any material to any infrastructure.
Suitable for gluing ceramic, porcelain and granite cladding tiles to walls and floors.
for gluing panels. For gluing sponges, fabrics, aluminum coverings.
Suitable for gluing on concrete, black block, plaster.
For gluing ferrous and aluminum metal parts between them and to cement and other elements in the building.
To repair cracked/broken concrete pipes.
For gluing linoleum, PVC, fiberglass and more.
For gluing steel spikes in construction additions.
For anchoring steel rods and screws.
For gluing wood in the building and wood elements in thin floors.
For filling holes and gaps in concrete and others.
For anchoring machines in industry to the floor and repairing cracks in the floor.
For bonding glass to aluminum and others.
For gluing stainless steel parts between them and of iron and glass to stainless steel.

Powerful epoxy glue, 100% solids, two components

Technical data:

Average consumption – 3 liters per 1 square meter for a 3 mm thick layer.
Density -0.2 + 1 gm/cm ³ .
Viscosity – 20,000 cps (Brookfield).
Stiffness – 10 < Dg (Ericsson).
Hardness – 87 Shore D (ASTM D 2240)
Mixing ratio – transparent: 2:1 by weight. in volume 1:0.6 (it is recommended to completely mix part A with part B to prevent mistakes in the mixing ratio).
Abrasion – 120 microns – 5500 cycles (Gardner) ASTM.
Recommended layer thickness – at least 1 mm and no thickness limit.
Recommended number of layers – one thick layer at any thickness.
Working time with the mixture (pot life) – 5 minutes at an ambient temperature of 10-30 degrees.
Tensile strength – 25MPa >
Shear strength – 20> MPa
and pull off tear strength – 12MPa > after 7 days.
Bending resistance – 16 MPa
Compressive strength – 85 MPa