Epoxyden 7 Ellectric Isolation

Epoxyden 7 Ellectric Isolation

Epoxy casting coat high build for electric isolation

Epoxyden 7 Ellectric Isolation. www.denber-paints.co.il

Epoxyden 7 Ellectric Isolation. www.denber-paints.co.il

Two component hard top coat for electrical insulation. 100% solids, for internal and external coating, especially suitable as protective coating upper insulating of electric and electronic systems that are exposed to water and moisture, prevents short circuit and to systems that moving and vibrating, for securing and protecting the physical harm that can be caused by mechanical vibrations and blows.

Epoxyden 7 Ellectric Isolation. www.denber-paints.co.il

Epoxyden 7 Ellectric Isolation. www.denber-paints.co.il

Epoxyden 7 is a high build coat transparent/shades hard top, decorative smooth and durable. Perfect insulating and moisture sealing, prevents damage caused by vibrations of transformers and the like, stamina mechanical and chemical erosion and the harshest of climates. Very smooth, dust-resistant, can be applied in several layers. Does not fade despite long exposure to the sun.

Epoxyden 7 Ellectric Isolation

Epoxy casting coat high build for electric isolation

Properties :

  • Excellent electrical insulation.
    • Smooth finish and tough.
    • Very washable and dirt repellent.
    • High hardness, suitable for outdoor conditions such as electrical cabinets and power poles and street lighting.
    • Excellent adhesion capacity infrastructure.
    • Resistant to the scratches and mechanical damage.
    • Easy to apply, you can get any coating thickness of a single layer flannel / casting.
    • Resistant to chemicals.
    • Resistance to heat and cold.
    • Does not contain cadmium, lead and chromates.

Applications:

  • For upper layer of insulating systems that may come in contact with water or high humidity and transmit power that can endanger human life and / or cause a short circuit.
  • Painting Accessories & Parts Manufactures / power strips and equipment Land Mobile / Fixed produces electricity.
  • Coating printed circuit boards.
  • Coating transformers sealing and preventing damage to vibrations.
  • Anchoring components and electronic circuits into their assemblies. Prevent separation or tearing.
  • Reduce noise of power equipment.

Epoxyden 7 Ellectric Isolation

Epoxy casting coat high build for electric isolation

Technical data:

  • Part A – can be mixed easily manually and after two minutes will be accepted solution is smooth.
  • Part B – clear and transparent.
  • Durability storage – 24 hours on 57O.C composite and upset ,
  • Layer thickness – without limiting thickness.
  • Erosion – 120 micron – 3600 cycles (BYK  Gardner ) ASTM
  • The ratio A:B – 1:1.66 by weight
  • Gloss  600C – Gloss >80 %  ,
  • Pot Life = working time from mixing B + A – 20-30 minutes (varies depending transparent variety and temperature) .
  • Distilled water resistance 24 hours – with no loss of adhesion or corrosion 1 hour after take out of the liquid .
  • Resistance to hydrocarbons – with no loss of adhesion 1 hour after take out of the liquid .
  • Oil Resistant 24 h at 1250 121OC – without loss of adhesion four hours after pull off the liquid .
  • Hydraulic oil resistant 24 h at 66OC – no loss of adhesion four hours after pull of the liquid
  • Heat resistance – 121OC for 60 minutes. Without a change of color up to Delta E = 1 .
  • Humidity cabinet test – 30 days 100% humidity temperature 49OC without losing adhesion or damaging the film Time After Pull out of the liquid
      • Thermal shock – with no loss of adhesion.
      • Solid % – 100 %
      • Electrical insulation (dielectric strength) at a temperature of 18-22 degrees – 30 kV mm – passes.
      • Dielectric Strength breaking stress of dry layer 25 microns -150 KV/mm  (ASTM-D-149)

Epoxyden 7 Ellectric Isolation

Epoxy casting coat high build for electric isolation

Contains:

  • Special epoxy resin.
  • Fillers.
  • Additives.
  • Part B hardener – a special sort

Colors:

  • Translucent or any shades.

 Gloss:

  • Glossy.

 Touch-dry time:

 24 hours.

Application method:

  • Brushing, scrolling cast.

 Dilution:

  • No dilution.

Epoxyden 7 Ellectric Isolation

Epoxy casting coat high build for electric isolation

Surface preparation:

  • Thorough cleaning dust, grease, dirt and loose paint.
  • Sand with glass paper and remove dust with air pressure.

Primer paint:

  • Epoxyden primer Antifliim aviation “MIL-C-PRF-23377G Rust.converter..

Packaging:

  • 3.12 kg +1.88 kg = 5 kg.

 Storage:

  • Cool and shaded place at room temperature with appropriate ventilation.
  • Keep lids hermetically closed/

Shelf life:

  • 12 months in original packaging.

Tools cleaning:

  • Thinner D-4/100 at the end of work.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Epoxyden 7 Ellectric Isolation

Epoxy casting coat high build for electric isolation