Furniture high quality lacquer

Furniture high quality lacquer

High quality polyurethane varnish for wood and furniture part A+B

Universal professional lacquer for coating furniture with different gloss levels Part I and Elliptical UV hardener Part B

High-quality polyurethane varnish for wood and furniture Denver Colors www.denber.net

High-quality polyurethane varnish for wood and furniture www.denber-paints.co.il

Part A – universal two-component polyurethane varnish for professional coating of furniture , in gloss levels: 10%, 20%, 30%, 60%, 90%,

With part B hardener: UV resistant acrylic UV hardener , non-yellowing.

LACQUER FUNNITURE POLYURETHANE – with gloss of 10%, 20%, 30%, 60%, 90%, part “B” UV resist

Hard, glossy/matte/silk top professional polyurethane varnish (5 gloss levels), smooth and durable decorative for painting furniture in the furniture industry with a non-yellowing hardener.

Characteristics:

Smooth and hard finish gives a luxurious transparent look to the furniture.
Flexible for bending and hard for abrasion.
Very washable and repels dust and dirt.
High hardness, suitable for painting items that come in contact with a lot of wear and tear.
Strengthens the surface of the furniture against damage and scratches.
Excellent adhesion to the infrastructure.
Resistant to scratches and mechanical damage.
Easy to apply.
“UV” model hardener does not yellow resistant to exposure to the sun, suitable for furniture made of light wood or smeared with light egg and there is no room for yellowing that will change the color of the furniture.
Heat and cold resistance.
Very high gloss or other on demand, durable for many years.
quick drying.
Does not contain cadmium, and contains lead up to 06% as permitted. Does not contain chromates.

uses:

For varnishing furniture in the furniture industry.
For coating parquet and thin floors, wind boxes, wooden furniture.

Universal professional nail polish for coating furniture with different gloss levels Part I and Elliptical UV hardener Part B

Technical data:

Part A – transparent, can be mixed by hand easily and after 5 minutes you will get a uniform and smooth solution.
Part B – will be transparent and clear.
Storage durability – 24 hours at 57 ⁰ without separation and spoilage,
Theoretical coverage – 1 liter per 10-15 square meters.
Practical consumption – 1 liter per 8 square meters.
Recommended layer thickness 35-40 dry microns.
And recommended wet layer thickness – 60 microns.
The thickness of 2 layers wet on wet is recommended – 120 microns and
Flexibility – 1 mm (sheen) f
Density – 0.9-1.1 gm/cm ³
Average viscosity A + B – 0.4-0.8 sec
and the viscosity of glossy colors B+A – 17-23 seconds in 2 # (<95 Krebs) and
Matte paint viscosity B+A – 115 > Krebs and
Stiffness – 10 Dg < (Ericsson) f
Abrasion – 120 microns – 3600 cycles (Gardner) ASTM f
Base to hard ratio – 2:1
Durability time of diluted paint in the package – 6 hours (viscosity increase no more than 6 seconds from original viscosity) and
Shine at 60 ⁰ – shiny 90% <, high silk – 60% shine, low silk 20-30%, matte 10% >
Pot life = working time from the moment of mixing B+A – 6> hours

variety:

clear transparent and

Lightning:

Glossy, matte, silky to choose from 5 gloss levels. and

primary color:

Insulation for transparent natural wood. and

packing:

5 liters part A+B. 15 liters part A+B f

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard

For the full specification: high-quality polyurethane varnish for wood and furniture A+B