Acrylic putty exterior walls

Acrylic putty exterior walls

DENBERSCHPACHTEL ACRYLIC – all purpose, ready-mixed joint compound for exterior walls surface preparation before painting

Denber acrylic putty Putty for exterior walls – an easy-to-apply and easy-to-rub acrylic filler putty for exterior walls, which gives the wall a smooth and delicate appearance as required before starting painting. Fills cracks and small holes and fills and smoothes the wall. Gives the wall a beautiful and delicate decorative look. Extremely strong and durable in outdoor conditions even in direct exposure.

Acrylic putty exterior walls www.denber-paints.co.il

Characteristics:

Ready to use.
quick drying.
Adheres well to the wall, fills and seals cracks, grooves and small holes and depressions.
For external use only to beautify and smooth the wall before painting.
Rubs off easily.
Does not shrink or sink and leaves a smooth surface.
Adheres excellently to plaster, plasterboard, concrete, etc.
Excellent adhesion to primary colors such as Danbarol and Danbartex primer.
Easy to apply with putty and grout

Denber putty acrylic putty for exterior walls www.denber-paints.co.il

Uses:

For exterior walls in preparation for paint.
For filling cracks, grooves and depressions in exterior walls.
For smoothing and getting a perfect finish before paint
For filling and smoothing prefabricated wall joints, concrete elements, rough exterior plaster, bricks, blocks, etc.

Special acrylic putty for exterior walls

Technical data:

Average viscosity – 70,000cPs (Brookfield)
Flexibility – 6 mm (SHEEN)
Stiffness – 1 Dg (Ericsson)
Recommended number of layers – 1-2
Density – 1.6 g/cm3

containing:

Acrylic emulsion.
Melanes – quartz
Smoothing materials
Wetting agents.
additives.
Preservatives.

variety:

white.

Lightning:

Matt.

Touch drying :

30-60 minutes. (depending on the thickness of the layer and the ambient heat)

Drying between layers:

2-3 hours. Final: 3-4 hours

Application methods:

Applying – with putty or gel
Polishing – with glass paper until a completely smooth surface is obtained

Dilution:

without dilution.

Special acrylic putty for exterior walls

Area preparation:

Thorough cleaning of dust, grease, dirt,
Widen capillary cracks with a width and depth of 3-8 mm

primary color:

If the Dunbarx plaster does not stick to the wall due to grease or a crumbling wall, rub with glass paper and paint with a binding agent – Danbartex Primer .

packing:

2.5 liters, 5 liters, 18 liters.

storage:

In a cool and shady place at room temperature with adequate ventilation.
Not resistant to freezing except for export model.
Make sure the lid is tightly closed.
Be sure to cover the material with nylon in its packaging to prevent liquid evaporation and drying out.

Shelf Life:

12 months in the original packaging.

This technical specification is for non-binding general information only