Burner for burning tones in artificial stone and concrete

Burner for burning tones in artificial stone and concrete

Caulk liquid, sealing and introducing shades to the infrastructure

A unique emulsion for burning concrete and cement elements, natural and artificial stone and thin wood that creates a deep seal with chemical burning, the seal prevents the penetration of water that damages the iron in the concrete and crumbles cement elements and the killer and prevents fungus, rot and mold especially in wooden floors, thus preventing their accelerated weathering and extending their service life.

Bacterial tested and approved at IMSL MICROBIOLOGICAL SERVICES LTD laboratories . Test No. 1013627,55/4515 A unique development – an emulsion for burning cementitious elements that also contains some of the most advanced biocides in the world.

Burner for burning tones in artificial stone and concrete www.denber-paints.co.il

Characteristics:

Attaches to the surface on which it is applied/sprayed in a chemical molecular way and becomes an integral part of it.
Seals the surface perfectly against water and water vapor and allows the passage of air vapor.
Prevents the formation of dust during abrasion.
Antibacterial, kills bacteria and prevents the development of diseases, acts as a catalyst that paralyzes the enzymes used for oxygen exchange of bacteria, viruses (viruses) and fungi that are unicellular and cannot exist in its environment and are killed.
Prevents mold, fungus, rot, fungus, mildew, bad odors.
Odorless, water-based, easy to apply.
Transparent and does not change the texture of the concrete or the element on which it is applied.
Very washable and resistant to scrubbing.
Excellent adhesion to cementitious elements.
Protects the concrete on which it is applied from water penetration that creates the disintegration of the concrete and the rusting of the rebar that swells in contact with water and explodes the concrete.

uses:

For coating new concrete surfaces 21 days after casting , for sealing and preventing dust from erosion due to regular use such as pedestrians, loading carts, forklifts, vehicles, etc.
For coating external and internal walls of damp rooms, etc.
and for coating natural and artificial stone for sealing and strengthening the stone, etc.
For introducing pigment shades into an artificial stone in a burning process .
For sealing thin wooden floors to prevent water penetration and wood rot.

Burner for burning tones in artificial stone and concrete

Caulk liquid, sealing and introducing shades to the infrastructure

Technical data:

Coverage capacity – 1 liter per 5-10 square meters (depending on the absorption level of the infrastructure).
Viscosity – 13 seconds Cups # 4.
1mm flexibility (Sheen).
Density – 1.0-1.1 gm/cm ³ .
Stiffness – 3 Dg (Ericsson).
Abrasion – 120 microns – 500 cycles (Gardner) ASTM.
Resistance to scrubbing – minimum 200 cycles according to the Israeli standard 1945.
Recommended minimum layer thickness – 40-60 microns.
Recommended number of layers – 1-3.

containing: