Separating oil molds metal/wood

Separating oil molds metal/wood

Oil molds for metal and wood before pouring concrete

Separating liquid for concrete molds in the building

Mold oil for metal and wood before pouring concrete – transparent oil for applying or spraying on iron and wood molds, before pouring concrete, for easy release of the molds at the end of the casting. Absorbs deeply and maintains the flexibility of the wood. Ready to use for proper dilution.

TEMPLATES CONCRETE OIL – clear oil  for easy release of metal and wood concrete forms

Characteristics:

• Transparent mineral oil.
• Easy and convenient to apply.
• Easily releases the concrete molds after the casting has dried.
• Reduces friction during casting.
• Minimal staining of the concrete.
• Resistant to outdoor conditions.
• Contains additives that provide good dispersibility.
• Enables obtaining a smooth and clean concrete surface with minimum segregation.
• Wooden molds – protects the wood from weathering and decay.
• Lubricates the wood deeply and prevents drying and cracking.
• Improves the flexibility of the wood and its fracture resistance.
• Metal molds – prevents the concrete from sticking to the mold.
• Lubricates the metal and prevents corrosion and rust.
• Economical, for spraying/applying in a thin layer.

uses:

• Lubrication of metal and wood concrete molds.
• Suitable for lubricating molds for all types of concrete castings, including high pressure casting.
• To prevent concrete sticking to equipment in concrete pumps.

Separating liquid for concrete molds in the building

Technical data:

• Effective coverage – 1 liter per 10-20 per square meter depending on absorption.
• Density – 0.86-0.88 gm/cm ³
• Viscosity – 100-300 s (Brookfield)
• Flash point – ^O C 70 close cup,  ^O C200 open cup
• Recommended layer thickness – 50-100 wet microns.
• Recommended number of layers – for metal and used wood one layer. For a new tree – at least two, each additional layer that is completely absorbed is recommended – until saturation.

containing:

• Transparent mineral silicone oil.
• alcoholic solvent
• dispersing additives.

variety:

• Clear.

Application methods:

• Brushing, rolling, spraying.
• Recommended with 4 atm pressure spray.

Dilution:

• Mineral turpentine/diesel up to 4 thinner units per liter of mold oil.

Area preparation:

• Thorough cleaning of dust, dirt, concrete residues.

User manual:

• Metal molds – spray/apply one thin layer.
• New wood molds – spraying/applying first layer. After 30 minutes a second layer.

packing:

• 18 liters, 200 liters, 1000 liters.

Oil molds for metal and wood before pouring concrete

Separating liquid for concrete molds in the building

storage:

• In a cool and shady place at room temperature.
• Make sure the lid is tightly closed.

Shelf Life:

• 48 months in the original packaging.

Cleaning tools:

• turpentine or thinner 18 at the end of painting.