Water soluble mold oil

Water soluble mold oil

Separation oil for concrete molds to be diluted with water. Economical and environmentally friendly.

Separation fluid – emulsifying oil to mix with water. Concentrated emulsifying transparent emulsion oil for separating wood, steel, rubber molds and more. Suitable for dilution with water. Ecological mold oil.

TEMPLATES CONCRETE OIL  EMULSION – water base oil to mix with water

Characteristics:

• Concentrated mold oil to dilute with water.
• To add water before use.
• Easy and convenient to apply.
• Does not cause corrosion in metal molds.
• Reduces friction during use.
• Helps to easily release the mold from the concrete and cast elements from flexible molds.
• Suitable for prefabricated castings.
• Suitable for formal and designed templates.
• Very economical.
• Very safe. is not flammable.
• Suitable for spraying vertical and horizontal surfaces.
• Allows the mold to be washed easily with water.

uses:

• Lubrication of wooden molds.
• Lubrication of steel molds.
• For lubricating rubber molds.
• For lubricating epoxy molds.

Technical data:

• Density – 0.9-1.0 gm/cm ³
• Viscosity – 60-80 s (Brookfield)
• Flash point – ^O C 70 close cup,  ^O C200 open cup
• Cover area for steel molds (non-absorbent) – 1 liter diluted 90% (9 liters of water) – up to 150 square meters
• For absorbent wood molds – 1 liter diluted 90% – up to 70 square meters in two layers.

Water soluble mold oil – Denver

Separation oil for concrete molds to be diluted with water. Economical and environmentally friendly.

containing:

• mineral oil.
• Emulsifiers.
• stabilizers.
• Preservatives.

variety:

• milky white

Application methods:

• Dilution with water.
• Spraying/applying.

Dilution:

• water.

User manual:

• Clean the mold thoroughly from any dirt or concrete residue.
• The mold must be dry and clean before spraying/applying.
• Mix the contents of the package well to obtain a uniform milky solution.
• Mix with water in a desirable ratio of 80-95% water. (1 liter of water-based mold oil with 8-9 liters of water)
• Spray an even and full layer on the mold.
• For the absorbent mold, wait for it to dry (up to two hours) and spray another layer.
• And for a new rubber mold/new absorbent wood panels, it is recommended to spray without dilution the first time.
• For an opaque wooden mold, new coated plates are sprayed with a normal diluted spray.
• Excess material should be removed with a cloth.

packing:

• 5 liters, 18 liters, 200 liters. and

storage:

• In a cool and shady place at room temperature. and
• Make sure the lid is tightly closed. and

Water soluble mold oil – Denver

Separation oil for concrete molds to be diluted with water. Economical and environmentally friendly.

Shelf Life:

• 48 months in the original packaging. and

Cleaning tools:

• water. and

safety:

• Not for food, keep out of reach of children. and
• Work with gloves and goggles. and
• In case of injury – wash with plenty of water and seek medical attention immediately. and