Spray TutGum Antiflame Fire Retardant. Denber paints

Spray TutGum Antiflame Fire Retardant

Fire retardant lacquer or paint standard 755

Spray Tutgum antiflame – lacquer/paint/coat fire retardant.

Spray TutGum Antiflame Fire Retardant. www.denber-paints.co.il

Varnish, paint, coating, which prevents the spread of fire and suppresses smoke, standard 755 level 5.3.3 based on chlorinated rubber/acrylic, and special polymers, for painting flammable fire protection products. Absorbent combustion materials serve as a top layer of protection for fire absorbing materials.

Fire retardant lacquer or paint standard 755

Varnish/fire anti-fire for the protection of carpets, PVC, rubber parts, plastic, fabrics, wood, electrical cables, etc. with excellent protective capacity that prevents and inhibits the spread of fire in case of fire. Resistant to harsh climate conditions. Abrasion resistant. Flexible and suitable for the movement of buoyant products. Diluted with a fast thinner, evaporating quickly, and shortening the final drying time of the color. An extremely strong coating with a unique molecular structure. Inhibits the spread of fire and suppresses smoke, sticks well to the existing infrastructure and to the part intended for protection. Made in a natural shade that is transparent and yellowish, and manufactured in every shade according to the customer’s order. The paint/varnish inhibits the spread of fire and suppresses smoke retains the IFR-30 fire absorbents that are inserted into absorbent materials from coming into contact with water and dissolving.

Passed the Standards Institution of Israel test for Standards 5 standard, test no. 9211900051

Fire retardant lacquer or paint standard 755

Features:

Ready to use.
Flexible and strong.
Quick drying is ready in 2 hours for painting an extra layer.
Excellent adhesion capacity for steel, concrete, wood, PVC, plastic, etc.
The intensity of its adhesion enables the preservation and protection of the IFR-30 soaking material and provides quality fire protection for carpets, parquets, pergolas, curtains and fabrics, cardboard, nir, sponge and other absorbent materials.
Flame retardant of each flammable product including plastic and PVC elements and plumbing and coating of electrical cables until the fire penetrates through the paint and melts the flammable plastic.
Can be applied in a single layer of 125 dry microns.
Prevents rust in several shades such as red-brown, black, mustard and gray.
Easy to apply with brush, splash, roller.
Prevents fire from developing and suppresses smoke.
Durable in a wet and salty atmosphere.

Fire retardant lacquer or paint standard 755

Uses:

A protective layer and an upper sealing for the IFR-30 soaking material that is first absorbed layer into fire protection materials to the depth of the product protected from high heat and internal ignition.
For fire protection for carpets, curtains and fabrics, floors to walls and doors and wooden ceilings, wind cases, wooden structures exposed to water and/or moisture, sponges, so that the absorbent material does not come out.
For fire protection for paper and cardboard exposed to moisture and water.
As top decorative paint against fire for steel and metal parts on the Denbercryl anti-flame paint system for decoration and water protection purposes and for external resistance in direct sun.
A primer paint for galvanized steel and black iron before coating inflammable anti-flame Denbercryl paint and a protective leaf for outdoor conditions.
Coating flammable plastic products for combustion delay.
For protective coating for electrical cables.
Coating fire-sensitive areas for protection and prevention of flare-ups.
In areas where welding work is carried out and there are sparks from cutting steel that can cause fire.
To prevent the development of fire in case of fire.

Fire retardant lacquer or paint standard 755

Technical data:

Consumption– 200-250 grams per square meter per layer depending on the level of absorption of painted products.
Solid% – approximately 48% (T.I.785 Part 17).
Color pigment content – 65% (TA 785 Part 19)
Flexibility – 1 mm (sheen) Meets the examination of Israeli Standard 935 Section 307.
Grinding – up to 50 microns (T.I. 785 Part 15 – up to 60 mick)
Density – Varnish: 0.9 Color: 1.45-1.6 gm\cm3
Water immersion resistance – no bubbles, No softening, no change in adhesion, (T.I.935 Section 312)
Resistance to “bleeding” – no less than level 6 according to ASTM D-868 and ASTM D-969
Resistance to solvents and fuels – resistant to ASTM D-2792-93
Viscosity –room temperature.
Color: 1.5-2.sec Pa.sec (HAAKE) 78-92 Krebs in 200 rounds per minute after manual mixing of 2 minutes (T.I.935 Section 302), after diluting 10% in the thinner – 65 Krebs. After 10 days it is stored at 42ºC – the position will increase to 5 krebs.
Rigidity – 10 >Dg (Ericsson)
Abrasion – 120 microns – 1050 cycles (Gardner) ASTM, American standard ASTM D4060 dry film thickness 200 microns, weight loss – 2 g per 500 cycles (device – up to 2.5 g authorized loss)
Exfoliation strength – minimum 5 kg per square Centimeter.
Heat resistance up to 70 °C unchanged in features and deformation.
Recommended layer thickness –250-200 microns wet.
Number of layers recommended as a foundation – 2
Number of layers recommended as superior – 1

Fire retardant lacquer or paint standard 755

Contains:

Chlorinated rubber and special acrylates.
Fillers, pigments.
Special flex materials.
Depth penetration materials.
Solvents, additives.
Flame retardants.
Gas

Hue:

Varnish: Translucent Yellowish,
Color: Standard White,
Any Shade in order.

Gloss:

Matte up to 18%, Silk 30-45%, glossy 80-95% (T.I.935 Section 309).

Fire retardant lacquer or paint standard 755

Drying to the touch:

15-25 minutes. Drying time in the wheel – (T.I.935 Section 304 Correction No. 2) – up to 45 minutes

Between layers:

2-4 hours, final: 6 hours.

Application methods:

spraying

Area preparation:

Thorough cleaning dust, fat, dirt, it is recommended to rinse with Degreezer Z to remove fats if any, to ensure cleanliness of the area before painting.
Rust can be removed with rust remover 3000, fats with Degreezer M, sand blasting to sa-2.5 level
For plastic – removal of fats with Degreezer AA or easy polishing for roughness and perfect shine removal, cleaning again with Degreezer AA.

Fire retardant lacquer or paint standard 755

Packaging:

400 cc

Storage:

In a cool, shady place at the room temperature with proper ventilation.
Keep lids tightly closed.

Shelf life:

12 months in the original packaging.

Cleaning tools:

Thinner 21-D immediately after painting.

Safety:

Not edible, out of reach of children.
Flammable, away from heats, fire and sparks.
Ensure proper ventilation during application.
Wear goggles, solidarity gloves, protective clothing.
In case of injury , seek medical attention immediately.

Fire retardant lacquer or paint standard 755

Caution:

Do not mix with materials not recommended by us.
Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
In contact, rinse with plenty of running water and seek medical attention.
Do not paint with high environmental heat and it is recommended to paint onion only and late morning and early evening.
Recommended in heats not exceeding 30 degrees and humidity of up to 50%.
Pressure tank – empty the container before it is thrown, do not throw into the fire – the risk of exploding.

Quality audit:

In our factory laboratories in accordance with iso 9001-2015 specifications

Fire retardant lacquer or paint standard 755

For user attention:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards.

Spray TutGum Antiflame Fire Retardant