Polyflex 151 Intumescent Injection PU+catalyst. Denber paints

Polyflex 151 Intumescent Injection PU+catalyst

Stop’s water licks, seal cracks, stop capillary water lifting.

Polyflex 151 Intumescent Injection PU+catalyst www.denber-paints.co.il

Liquid polyurethane two-component flexible sealer. Multi-thickness hydrophobic elastomeric polyurethane, inflatable when encountering water. A powerful blend is ready to be injected under pressure into cracks and grooves from which water penetrates, 100% solids, to fill and seal cracks in reservoirs and on basement floors and on other underground floors from which groundwater or rainwater perishes. Suitable for leak repairs in exterior and interior cladding, flooring and panels, water-penetrating toes and capillary topped. Seals concrete connections that are on the move and which vibrations will cause cracking and/or disintegration and water penetration through the cracks. To fill gaps between concrete plates at any unlimited thickness to prevent groundwater passage during the process of digging the colons. No smell and no thinners.

Polyflex 151 Intumescent Injection PU+catalyst. www.denber-paints.co.il

Features:

Water-sensitive injection fluid, inflatable in contact with them.
Flexible and strong, multi-thickness and powerful, can be injected in any required thickness.
Excellent adhesion to concrete.
100% solids – contains no water or thinners.
High tolerance for heavy pressures and loads.
High mechanical strength, workable and easy to inject.
Easy to implement and dry quickly.
Durable in wet and humid conditions, resistant to chemicals and fuels and oils.
Resistant to oil, seawater, fresh water, acid resistant and alkali, standing water, resistant to industrial waste for an extended period of time.
Suitable for filling by injection into a blockage and sealing water leaks.
After its final dry, it seals and stop water penetration.

Polyflex 151 Intumescent Injection PU+catalyst

Stop’s water licks, seal cracks, stop capillary water lifting.

Uses:

Seal licks in reservoirs.
To seal groundwater penetration in elevator shaping
to seal groundwater intrusions in underground structures.
Seals capillary penetration over flooring height.
Sealing sewage pipe leaks.
Sealing spot leaks from vertical and horizontal walls infiltrates irrigation water.
To close nozzles in concrete castings in water reservoirs and to prevent sweating and/or leaks through them.
Repair and maintenance in dams and water reservoirs and plumbing and piping accessories.
Sealing in peripheral walls in excavations for the purpose of drilling poles.

Technical data:

Consumption – 100% solid, amount of liters consumption by amount of injection.
Density – Transparent Base – 1.0+0.2 gm\cm3. Transparent hardener – 0.2+ 1.22 gm\cm3
viscosity – 8,000 < cps (Brookfield).
Volume mixing ratio – 17.5:0.5 or 1:1
recommended thickness – without limiting thickness.
Multiple layers are recommended — in one thick layer.
Pot life work time – see data below.
Impact Strength – 1.8 Dg/mm2

Contains:

Blend of Inflatable Polyurethane Resins in contact with water.
Additive for chemical resistance.
Special materials.
Depth penetration materials and adhesion improvers.
Tixotropic additives.

Polyflex 151 Intumescent Injection PU+catalyst

Stop’s water licks, seal cracks, stop capillary water lifting.

Shade:

Translucent yellowish.

Gloss:

Matte Silk.

Drying to touch:

2-4 hours in 25 degree heat, for a layer of up to 500 microns
between layers: 12-16 hours, Final: –16-24 hours, final hardness – 3-7 days.

Application methods:

Mixing Part A with Part B in the appropriate ratio and injecting under pressure through a fall to a repeater inserted into the wall in drilling in the leak area.
It can be injected with electrical or pneumatic equipment that creates pressure such as airless and also a suitable pressure pump.
Small portions can be injected with an grease hand gun.

Dilution:

Must not dilute.

Preparation of area and application:

Drilling every 20 cm in the leak/sweating areas, inserting a fall into the repeat and screwing for a firm grip on the wall.
Injection.

Life time after mixing depending on the heat of the environment (for a mixture of 1 liter):

10 degrees – 20 minutes
15 degrees – 15 minutes
20 degrees – 12 minutes
25 degrees – 10 minutes
30 degrees – 8 minutes
35 degrees – 5 minutes

Polyflex 151 Intumescent Injection PU+catalyst

Stop’s water licks, seal cracks, stop capillary water lifting.

ventilation: without solvents, a medium amount of air will suffice.

package:

0.5 concentrated accelerator + 17.5 =18 liters or 10% catalyst for non-standard packaging (0.1+1 = 1.1 liters, 0.5+5=5.5 liters)
10 liter + 10 liter (1:1)

Storage:

In a cool, shady place in the room temperature with proper ventilation.
Keep lids tightly closed.

Shelf life:

12 months in the original packaging.

Tool cleaning:

Thinner 11-D or 4/100 –D after painting.

Safety:

Not edible, out of reach of children.
Ensure proper ventilation during application.
Wear goggles, gloves, protective clothing.
In case of injury , seek medical attention immediately.

Caution:

Do not mix with materials not recommended by us.
Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
In contact, rinse with plenty of running water and seek medical attention.

Quality review:

In our factory laboratories in accordance with specifications.
ISO 9001-2015

Polyflex 151 Intumescent Injection PU+catalyst

Stop’s water licks, seal cracks, stop capillary water lifting.

Please note: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are introduced, the manufacturer has the right to change it at any time without notice, to request up-to-date versions. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards