Bertex In gentle textured wall coating

Bertex In gentle textured wall coating

Orange effect coat or needles

Bertex In gentle textured wall coating. www.denber-paints.co.il

Bertex In gentle textured wall coating. www.denber-paints.co.il

Textured protective acrylic over coated decorative exterior/interior walls coat

Acrylic high-quality building walls coat. 

White or colorful in durable shades. High quality acrylates, for tough climate. Washable and fits for outside conditions, it is a “breathing” coat. Contain fine aggregates that give the coating decorative texture layer for beautification and protection.

For order / buy call: 0503551551

or: PRESS

 Properties:

Decorative shades, white and a variety of colors .
Ready to use after dilution with water if necessary and stirring.
Excellent sealing ability.
Let vapors out “allows the wall to breathe”
Excellent adhesion capacity to Denberoll primer colors and Denbertex primer.
Easy to apply by roller and / or spray with a proper spray gun.
High mechanical strength.
Excellent resistance to outdoor conditions, resistance to UV
Washable to remove dust and dirt and easy renovation and refresh with Denbercryl paints.
Quick drying.
Can be applied in thick layer of up to 2.5 kg per square.

Bertex In gentle textured wall coating

Orange effect coat or needles

Applications:
• Exterior coating of walls of buildings.
• Coating concrete walls, plaster, asbestos, brick.

 Technical data:

  • Consumption: 1-2.5 kg/sqm
  • Viscosity: 10-12 Pa.sec
  • Flexibility: 4 mm (sheen)
  • Hardness: >3Dg (erichsen)
  • of layers: 1-2
  • Density: 1.5-1.6 gm/cm3

Contains:

  • High quality acrylic emulsion.
  • Advanced flexibility and leveling material.
  • Pigments.
  • Fillers.
  • Special fungicides and preservatives for long term outside conditions.
  • Wetting and leveling materials.
  • Thixotropic substances.
  • Additives.

Colors:

  • Transparent, bright white, standard colors according the Denbercryl catalog.
  • According the 1000 shades catalog and any other.

Gloss:

  • Matte

Bertex In gentle textured wall coating

Orange effect coat or needles

Touch-dry time:

  • 1 hour.

Drying time period between layer applications:

  • 3 Final: 12 hours.

Implementing method:

  • Roller
  • Spray gun with upper container, nozzle: 2 or 3 mm according needed texture.

Dilution:

  • 0-5%

Surface preparations:

  • Clean the surface from all the dirt, dust, grease and shaky paint.
  • Exterior walls – wash with water in 150 atm. Pressure.
  • Fill all exterior cracks and halls with Denber Schpachtel acrylic and interior with Denberschpachtel.
  • Apply primer coat” Denberoll” or “Denbertex primer” for crumble infrastructure or “Denbercryl 3000” for good infrastructure.
  • Apply the first layer of Bertex In.
  • After the first layer dries’ if needed apply the second.

Packaging:

  • 5 liters, 18 liters.

Bertex In gentle textured wall coating

Orange effect coat or needles

Storage:

  • In a shaded and cool place at room temperature with appropriate ventilation.
  • Keep lids close.
  • The product isn’t resistant to freeze (except the export model)

Shelf life span:

  • 12 months in its original

Equipment cleaning:

  • With water immediately after usage.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Bertex In gentle textured wall coating

Orange effect coat or needles