Denbercryl antiflame standard 931 for prevent fire passage

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

DenberCryl Antiflame standard 931. www.denber-paints.co.il

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

Flexible high build plaster/paint coat, water dilution, intumescing in heat and fire, prevents fire spread and smoke ejects. For interior and exterior coating on glass wool and metal in fire passes, in walls and ceilings, cables pass between floors, electric boxes and cables etc.

High viscosity plaster/paint for coating glass wool filling in electric cable passes to prevent heat and fire transfer in event of fire. Intumescing and isolate the effects of heat and the transfer of flames when a fire. Contains materials that prevent the development of flame combustion driven, and the spread of fire and its influences. Contains materials to minimize smoke. Diluted with water, very strong with a unique molecular structure.

Pass the Israeli standard institute standard 931 test No. 93119149631 – 181 minutes.

Pass the Israeli Standards Institute standard 755 rank 5. Test no. 8111202204

Pass Standards Institute in South Africa SABS British standard BS476 P20 and P21 test no. # FPE/84933/08A,

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

Properties:

Intumescing plaster/paint, suitable for interior and exterior uses, provides protection from fire up to 3 hours between floors and out of electric boxes in case of fire.
A quick drying, ready to recoat every 4-6 hours depending on the environment temperature.
A great adhesion to glass wool and epoxyden primer brominated antiflame.
Easily implemented after diluting with water by spreading with spray gun, airless, roller or brush.
Flexible and not cracking.
Prevents the spread of fire and development of flame.
Emits gas that shutdown flame.
Depressing smoke isolated the spread of heat to the infrastructure.
Dilution with water, can be applied as a paint on glass wool and electric cables and elements need to be protected from fire.
Intumescing up to 60 times and physically push the fire from the protected surface.
Can be applied in 500 micron layer per coat by spray.
Suitable for protect electric cables passes in walls from stone, gypsum wood and others.

Applications:

Coating glass wool or thermic wool in electric cable passes and on the cables going in and out the box and between the cables and filling the space between the glass wool and the wall.
Coating gypsum fire protection walls and electric distribution box/terminal
Coat limits to prevent fire spread to other places.
To coat and fill spaces between water and sewer pipes go between floors.
To coat gypsum walls to increase protection time from fire.
and To coat canals, chimneys, and smoke transfers in industry.
To coat heat and smoke receivers and canals in kitchens.
To fill in cartridge for sealing and filling small spaces and holes to prevent fire flames to pass,

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

Technical data:

Effective coverage – min. 3 mm wet on every side of 5 cm. glass wool with density of 150 kg/m²
Flexibility – 1 mm (Sheen)
Density – 1.3 gm\cm³
Viscosity – 13-15 Pa.sec (Haake)
Hardness – 3 Dg (Erichsen)
Erosion – 120 mic. dry film – 760 cycles (BYK Gardener)
Layer thickness recommended – spraying -200 microns wet layer, brushing – 500 microns wet layer.
Number of layers – as the number required to get the thickness needed
Level of fire protection – 3 hours (181 minutes) Standard 931

Contains:

Special Copolymer styrene acrylate.
IFR-30 products.
Intumescent heat catalyst.
Fillers and pigments.
Special flexible materials.
Preservatives and antibacterial additives.
Water and additives.

Shades:

Standard white

Gloss:

matte

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

Drying time:

For contact 30 minutes for thin layer. (Due to the fast drying when spraying, avoid from over spray “dust”) if creates “dust” retarder or water must be added and the air pressure must be lowered.
1-4 hours for thick layer of 500 micron and more.

Drying between coats:

Between layers: 4-6 hours. Final: 12 hours. Final hardness – 3-7 days.

Application methods:

Brushing, spraying, roller or spread with spatula.
The first layer – recommended dilution and spraying 5 atmosphere pressure
Second layer and more – spray or brush spreading or scrolling or with flexible plastic spatula. Can be apply by airless ratio pressure 1:45 and higher nozzle 0.2”-0.27”

Dilution:

Water, for thick layers can be applied with no dilution on pipes, glass wool or gypsum walls for fire durability, with spatula.
Brush/roller-10-20%
Spraying – first layer – 30%, second layer – 5%

Surface prepation:

Clean surface from dust, fats, dirt and loose paint..

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

Primary paint:

On glass wool – this paint diluted with 30% water.
On gypsum/stone walls – this paint or if there is adhesion problem with Tutgum Antiflame.
and On electric cables – the paint as is.
On steel – Epoxyden primer brominated or Tutgum Antiflame.

Top coat paint:

Denbercryl Antiflame in any shade or Tutgum Antiflame in any shade.

Packaging:

5 liters, 18 liter.

Storage:

In a cool and shaded room with appropriate ventilation.
Keep lids tightly closed.

Shelf life:

12 months in the original packaging.

Cleaning tools:

Water at the end of painting.

DenberCryl Antiflame standard 931 for prevent fire passage

Intumescent paint for fire block passes – standard 931 for 3 hours

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S