Polyflex Thermoseal Antiflame

Polyflex Thermoseal Antiflame

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

Flexible, fireproof, two-component polyurethane membrane coating 100% solid 100% elongation, providing perfect sealing from rain and water and high-quality thermal and acoustic insulation from heat and cold based on nanotechnology of hollow ceramics. The product is non-flammable and can be roughened against slippage. Multi-thick and powerful for coating various roofs in industry and for cooling and packaging warehouses, electrical installations, etc. Resistant to hot temperatures and deep freezing and unlimited thaws. For use in hot and cold countries. Also suitable for driving and parking light vehicles. Suitable for fireproof thermal insulation of industrial hot roofs from environmental heat.

THERMOSEAL POLYFLEX ANTIFLAME – UNFLAMMABLE COAT FOR ROOFS AND FLOORS SEALING, AUCUSTICS, THERMO ISOLATION AND FIRE RETARDANT.

A new technology for sealing coating and fireproof insulation, especially strong, for sealing and high-quality, abrasion-resistant thermal insulation with a unique chemical structure, which completely seals against moisture and allows elongation and contraction according to extreme temperature changes. Strengthens the existing infrastructure and gives a very smooth and strong layer that is resistant to wear and suitable for ongoing use. Seals and bridges across capillary fissures. Fills gaps & seales perfectly.

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

Features:

  • Perfect waterproofing, moisture repellent and prevents penetration into concrete on concrete roofs or tekel.
  • Thermal and acoustic insulator. Significantly reduces rain noise on the roof.
  • Non-flammable – extinguished from Elio.
  • The thermal insulation creates significant energy savings for heating/cooling the floor under the coated roof. The white coating repels sun heat up to 80%.
  • Creates a quiet and cozy atmosphere in rooms under the roof. Allows climate control, contributes to improved sleep quality.
  • Can also be applied in casting without thickness limitation.
  • Flexible, lengthens by at least100% and bridges capillary cracks.
  • Resistant to scratches and mechanical blows.
  • Strengthens any cement, bituminous and tin infrastructure.
  • Excellent adhesion capacity for infrastructure.
  • The strength of its adhesion allows for a multi-thickness coating in one thick casting from 0.5 mm to 10 cm.
  • Noticeably and immediately stops water penetration and heat/cold transfer.
  • Easy to apply and dries quickly.
  • 100% solidsundiluted & odorless.
  • Flexible and absorbs shocks and severe and violent mechanical blows, suitable as a shock absorber around roof-penetrating pipes, tin drainage channels etc’.
  • Ready for repainting and/or coating on the same day in the summer.
  • The expected area is very smooth and washable.
  • A rough aggregate can be added during casting to prevent slipping on roofs that serve as an overhead parking lot for vehicles, but washing will be more difficult.

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

Uses:

  • For fireproof sealing and thermal insulation for all types of roofs and floors including roofs used as light car parking.

 Technical Data:

  • Theoretical roof cover – 1 liter per 1 sqm 1 mm thickness for perfect sealing and partial thermal insulation.
  • Recommended minimum layer thickness for aschoric roof sealing – 2 layers of 750 microns
  • Recommended minimum coverage for industrial floors and overhead parking lots – thickness 3-5 mm = 3-5 liters per square meter.
  • Mixing ratio in volume Part A: B – 4:1  .
  • POT LIFETime after mixing A+B – 20 minutes
  • Flexibility – 1 mm(sheen)
  • Elongation – 100% <
  • Density of Part A and Part II – 1.2-1.4gm/cm3
  • Viscosity – 20,000cps (Brookfield)
  • Stiffness – 10Dg (Ericsson)
  • Adhesion capacity – 400 kg/cm2
  • Abrasion – 120 microns – 1500cycles (Gardner) ASTM
  • White light reflection – 80%.
  • Solids – 100%
  • Salt cell resistance 5% concentration – 3000 hours (ASTM B-117)
  • Thermal conductivity:

The level of thermal insulation in the entire range of possible temperature exposure:

40-degree – 15Mw/m.k

20-degree – 18Mw/m.k

0 -degrees – 20Mw/m.k

10+degrees – 21Mw/m.k

30+degrees – 23Mw/m.k

50+degrees – 25Mw/m.k

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

Contains:

  • Special two-component elastomeric polyurethane.
  • Fillers, pigments.
  • Flame retardants.
  • Thermal Insulators – Nanotechnology.
  • Special Flexibility Materials.
  • Deep penetration materials.
  • Supplements.

hue:

  • Standard Grey, Standard White (Special Order Shades))

lightning:

  • silk.

Dry to the touch:

  • 6-8 hours, finalwalking – 24 hours, final difficulty – 7 days.

Dry between layers:

  • 24 – 6hours depending on ambient heat. Fingerprint check.

Application methods:

  • Brushing, scrolling, casting and leveling comb and thorn roller.

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

Thinning:

  • It is forbidden to dilute.

Application instructions and field preparation:

  1. Concrete/asbestos roofs –
  • Thorough cleaning from dust, grease, dirt and loose paint. If there are grease – applying detergent from degreaser and rubbing broom.
  • Spraying water under pressure 150-200 watts minimum and waiting to dry completely.
  • Filling large holes and dents in the focalcalcium spill.
  • Filling constructive cracks with polyplex gum after expanding and deepening the crack
  • Planitary diamond polishing and thorough vacuum pumping,
  • Apply Primer 450 for damp areas, or Epoxycalcium Flor Primer for dry areas.
  • Deploy fiberglass meshes on the roof and apply one thick layer of 4 mm or 2 layers of 2 mm each, so that the mesh disappears completely.

2.Ischoric roof–

  • High pressure water flushing.
  • Filling chewing gum with bin and screw connections.
  • If the roof is rusty, apply a layer of rust-converting apoxidan antirostic.
  • Deploy fiberglass meshes on the roof and apply one thick layer of 4 mm or 2 layers of 2 mm each, so that the mesh disappears completely.
  1. Tar/bituminous roof –
  • High pressure rinsing, waiting to dry.
  • Apply Epoxycalcium Aqua Primer.
  • Deploy fiberglass meshes on the roof and apply one thick layer of 4 mm or 2 layers of 2 mm each, so that the mesh disappears completely.

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

  1. Industrial floors-
  • Diamond polishing and pumping.
  • Epoxycalcium Flor Primer Application.
  • Casting an antiphalytic thermosil polyplex layer 3 mm thick
  1. Overhead parking-
  • Concrete – diamond polishing and pumping. Apply Epoxycalcium Fleur Primer.
  • Bitumen sheets – high-pressure rinsing withZX-12 grease and waiting to dry completely. Apply an epoxycalcium affirmal aqua primer.
  • Casting of antiphalytic thermosil polyplex 3-5 mm thick depending on expected loads.

 Primary color:

  • On Dry Concrete/Asbestos – Epoxycalcium Flor Primer.
  • On moist concrete – Epoxicalcium Primer 450
  • About Bituminous/Tar – Epoxycalcium Aqua Primer.
  • On Aschoric/Panel – Apoxidan Primer, Rusty Mother – Apoxidan Antirest Rust Converter.
  • On Black/Galvanized Iron – Epoxycalcium Antiphalytic Primer.

packaging:

  • 4+1 = 5liters, 14.4+3.6 = 18 liters

Storage:

  • In a cool, shady place at room temperature.
  • Keep lids tightly closed.

Shelf Life:

  • 12months in original packaging.

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible

Cleaning tools:

  • Dilutes 11-D after painting.

safety:

  • Do not eat, out of reach of children.
  • Ensure proper ventilation while applying.
  • Wear goggles, solvent-resistant gloves, protective clothing.
  • In case of injury – seek medical attention immediately.

warning:

  • Do not apply on a damp roof, do not apply on rainy days.
  • It is forbidden to apply at a temperature lower than +20 degrees Celsius and humidity higher than 75%
  • Do not mix with substances not recommended by us.
  • Avoid contact with skin and eyes, causing dryness and irritation of the skin. On contact, rinse with plenty of running water and seek medical attention.

Quality Audit:

  • In the laboratories we factory according to specifications.
  • ISO 9001-2015

For user attention:

This technical specification is for generalinformation and non-bindingonly. The product is a professional product for professionals only who have already acquired previous experience in its implementation. The contents of this specification do not serve as a substitute for advice/guidance by an authorized consultant/instructor. It is mandatory to apply first to a small area for compatibility testing before applying large areas. The content of this specification changes over time and updates are introduced, updated versions must be requested. Names of professional consultants/instructors can be obtained by phone. Read safety instructionsMSDSof the product before you start working with it.

Manufactured by Denver Paints and Coatings Israel Ltd., P.O.B. 690 Sderot, 80100, certified by the Standards Institute of Israel in accordance withISO 9001-2015

Sealing and thermal and acoustic insulation flame retardant for roofs and floors – non-combustible