Denbergloss antistatic jets 83231

Denbergloss antistatic jets 83231

Denbergloss aviation antistatic black. Electrically conductive paint for discharging static electricity from moving parts in aircraft and  radar dome  MIL-C-83231 TYPE II

Superior aviation polyurethane paint, two-component electrically conductive, unique, high electrical conductivity, for static electricity discharge in helicopter and airplane blades, in the radome dome, resistant to rain, chemicals, resistant to oils and jet fuel, resistant to mechanical blows, severe erosion of dust, rain, hail and ice. UV resistant  . Resistance 1-10 kilo ohms per meter.

Characteristics:

• A high-quality electrical conductor that causes an antistatic electrical discharge that is created during movement and friction.
• Excellent adhesion to aviation aluminum parts, plastic, PVC, and most infrastructures.
• Resistant to outdoor conditions.
• Resistant to severe abrasion at high speed of dust, sand, rain, hail, etc.
• Black shade.
• Resistant to UV radiation
• Highly flexible paint.
• High hardness and resistance to mechanical blows and scratches.
• Low electrical resistance, high conductivity for abnormal, high and low electrical currents.
• Two-component, for professional use.
• Resistant to high inrush currents such as lightning, as well as differences in the intensity of electric currents.
• A minimum layer thickness of 50 microns is required to obtain quality conduction of 1-10 kilo ohms.

Uses:

• Painting airplane and helicopter blades.
• Exterior and interior painting of electronic equipment and plastic cases for all types of electronic/electrical equipment.
• For grounding sensitive electronic equipment.
• For grounding lightning or voltage intrusions.
• To shield electrical and RF cables.

Aviation static dissipator paint  83231 -MIL-C antistatic jet Danbergloss

Technical data:

• Theoretical coverage – 1 liter per 10 square meters (wet layer 100 microns).
• Flexibility – 1 mm (sheen)
• Density – 1.65-1.68 gm/cm ³
• Viscosity – 2-3 sec (HAAKE)
• Stiffness – 10 Dg (Ericsson)
• Hardness – 84 Shore A
• Recommended layer thickness – 40-50 dry microns.
• The amount of conductive materials: 45-55%
• Amount of solids – 45%
• Adhesion – B5 (3359-78 ASTM D-)
• Resistance – a strip 10 cm long and 1 cm wide and 100 microns thick dry – 1-3 kilo ohms
• Recommended number of layers – at least 5, to obtain a dry thickness of 200 microns and more for abrasion resistance of the aircraft blades in outdoor conditions.

Containing:

• Elliptical polyurethane resin.
• Melanins, electrical conduction components.
• Special plasticizers.
• additives.

Color:

• black.

Gloss:

• Matt. % 7 >

Drying :

• For contact – 0.5-1 hours, final – 6-8 hours, final difficulty – 5 days.

Application methods:

• Brushing, rolling, spraying. and

Dilution:

• In thinner D-11 up to 35% by volume to obtain a thinness suitable for uniform spraying without leaks. and
• Airless – thinning up to 10% nozzle 0.015″

Area preparation:

• Thorough cleaning of dust, grease, dirt and loose paint. and
• It is recommended to go over the surface with a cloth dipped in thinner or high-quality alcohol to ensure an area free of grease. For heavy greasy dirt, use degreaser M for high-quality degreasing. and
• Rubbing with glass wool to remove grains and blowing with air pressure if the surface is particularly bad for example faded is used. and

Packing:

• 3.4+1.6 = 5 liters. and

This technical specification is for  non-binding general information  only. and

Produced by  Denver Paints and Coatings Israel Ltd. , and

For the complete specification:  83231 -MIL-C Denbergloss antistatic jets and