Polyflex glass protector

Polyflex glass protector

Prevents glass scattering when broken – transparent coating

Polyflex glass protector www.denber-paints.co.il

Polyflex glass protector www.denber-paints.co.il

Prevents glass scattering when broken – transparent coating

Characteristics:

  • Coats glass and prevents scattering of glass pieces in case of breakage.
  • Airless can be sprayed to coat large glass areas such as in skyscrapers.
  • Flexible and bridges capillary cracks.
  • Penetrates deep into the microscopic grooves and cracks in the glass and fills and strengthens.
  • Transparent and clear as water.
  • The strength of its adhesion to glass allows for a thick coating.
  • Prominently and immediately stops the scattering of glass during breakage.
  • Ready for re-coating, after 24 hours.
  • UV resistant
  • The coating is based on a unique multi-solid elliptical one-component polyurethane.
  • The polyurethane creates a transparent, strong and durable coating with a built-in molecular flexibility suitable for its purpose.

uses:

  • For a protective coating against scattering in case of breakage for all types of glass surfaces.
  • suitable for glass curtain walls,
  • Suitable for coating windows, glass doors, showcases, glass bricks, etc.

Technical data:

  • Touch drying time – in the sun: 4 hours, in the shade: 8 hours, initial drying – 12-16 hours, final drying – 24 hours.
  • Final difficulty – 3 days
  • The coating is flexible – 1 mm SHEEN
  • Elongation (ELONGATION) – 300%
  • Transparency – clear as water
  • Shore hardness D – 35 (ASTM D2240)
  • Abrasion resistance – 2100 cycle Gardner
  • The viscosity of the mixture – 100 Krebs
  • Pot life – 60 minutes
  • solids – 100%
  • Mixing ratio – 2:1
  • Tensile strength – N/mm 2  30 (DIN EN ISO 527)
  • Tear resistance – N/mm 2  60 (DIN ISO 34 method B)
  • Recommended number of layers – 2-5
  • Recommended thickness of each layer – 60-150 microns without leaks
  • Recommended final dry general thickness – 300-500 microns.

Prevents glass scattering when broken – transparent coating

containing:

  • Polyurethane perpolymer.
  • blocked in
  • Special plasticizers.
  • additives.

variety:

  • transparent standard.
  • In UV resistant shades.

Lightning:

  • silk.

Touch drying :

  • 4-8 hours

Drying between layers:

  • 12-24 hours depending on the ambient temperature.

Application methods:

  • Spraying thin layers of 60-150 microns per layer without leaks.
  • More layers will provide better protection and for a longer time.
  • Small areas can be applied with a roller and brush.

Dilution:

  • No dilution in airless
  • If you don’t get a smooth area but an “orange peel”, XL thinner should be added.

Prevents glass scattering when broken – transparent coating

Area preparation:

  • Thorough cleaning of dust, grease, dirt and loose paint. and
  • Old and scratched glass, rubbing with “Zero” sandpaper and removing blown grains with air pressure or damp wiping. and
  • Filling cracks with a thick solution of Glas Protector 100 two-component. and

primary color:

  • There is no need for primer, the coating is SELF PRIMERING and

storage:

  • In a cool and shady place at room temperature. and
  • Make sure lids are tightly closed. and
  • Opened packaging must be closed immediately and well and turned over to prevent the penetration of moisture. and

Shelf Life:

  • 12 months in the original packaging. and
  • Opened package The entire material must be used, material left in an open package absorbs moisture and dries and cannot be reused. and

Manufactured by Denber Paints and Coatings Israel Ltd

Prevents glass scattering when broken – transparent coating