RTV – 1 red

RTV – 1 red

One-component moisture polymerizing silicone rubber

Non-stick, one-component liquid red silicone rubber for coating baking trays and cooking and frying utensils, flexible and extremely strong, resistant to high temperatures up to    230 O C 

RTV – 1 – one component non-stick red silicon rubber, humidity cure in room temperature, very flexible, for high temperature stove trays, cooking tools, coating etc.

RTV1 silicone rubber for high heat – www.denber.net

Food permit – Scan31-05-2023-184933

RTV1 silicone rubber for high heat - www.denber.net

Characteristics:

  • High adhesion.
  • Resistant up to 230 degrees constant heat in the oven and freezing up to minus 50 O C
  • approved for food. Coats baking food trays and prevents food from sticking to them.
  • Extremely flexible and strong. Mechanical strength and firm durability.
  • Resistant to scratches and friction.
  • Ready to use. Can be diluted to spray.
  • liquid leveler. Creates a smooth surface and prevents adhesion.
  • Easy to apply by any means possible.
  • Excellent resistance to water and outdoor conditions, UV resistance.
  • Excellent adhesion to the infrastructure.
  • Prevents sticking to the slipping surface
  • Electrical insulator.

Uses:

  • For coating baking trays to prevent sticking.
  • Suitable for baking croissants, buns, all types of bread and more..
  • For coating frying and cooking utensils.
  • For flexible filling and gluing in industry and aviation.
  • For anti-stick coating in industry on machines and production lines.
  • For the production of flexible molds for sculpture, art, baking.
  • With a thin coating of less than 0.5 millimeters (500 microns) it is recommended to dry in the oven to prevent the development of bubbles.

Technical data:

  • Recommended layer thickness for baking trays – 130-150 dry microns. or 150 grams per square meter.
  • Recommended thickness for frying and cooking utensils – 150-350 microns recommended in two layers.
  • For plastering and full drying – air drying 60 minutes + 1 hour at 250 degrees or 4 hours at 200 degrees.
  • Elongation – 250% (ISO 37 type 1)
  • Tear strength – 6.2N/mm (ASTM D 624 B)
  • Tensile strength – 3.2 N/mm 2  (ISO 37 type 1)
  • Density – 1.1-1.2gm/cm 3  (DIN EN ISO 1183-1 A)
  • Heat resistance up to 230 degrees Celsius without change in properties and deformation.

One-component moisture polymerizing silicone rubber

Color:

  • red. and

Application methods:

  • Spraying, rolling, brushing, dipping parts. and
  • Airless is the most recommended due to the need for minimal thinning. and

Dilution:

  • As needed 1:1 to 2:1 with mineral turpentine or non-toxic food grade aliphatic thinner. and

Packing:

  • 0.5 kg, 1 kg, 5 kg, 20 kg.

Storage:

  • In a cool and shady place at room temperature with adequate ventilation. and
  • Make sure lids are hermetically closed. and

Shelf Life:

  • 6 months in the original packaging. and

Cleaning tools:

  • Thinner 21-D immediately after painting. and

For the full specification on the old Denver site:  RTV – 1 red silicone rubber

This technical specification is for  non-binding general information only. and

Denber Paints and Coatings Israel Ltd