Denbersil® Roof Sealer 1
One-component white elliptical polyurethane for sealing roofs
A thick liquid made of a special one-component hydrophobic elastomeric polyurethane, flexible and hard, UV- resistant elliptical , which polymerizes from air moisture without the need for a hardener. To dilute with thinner XL to spray with Airless.
400% and more elongation, thick and strong, for coating all types of flat roofs. on old bituminous sheets or directly on the concrete roof. Resistant to deep freezing temperatures and unlimited thawing.
Approved by the Israeli Standards Institute Test No. 9611916540 including UV resistance to weathering TA 1793

Denbersil® Roof Sealer 1 www.denber-paints.co.il
DENBERSEAL® – ROOF SEAL 1 – ONE COMPONENT WHITE ALIPHATIC POLYURETHANE FOR SEALING ROOFS. WATER PROOFING MEMBRANE WITH >500% ELONGATION
Extremely strong, wear-resistant roofing, produced from special elliptical prepolymers that guarantee resistance to climate conditions and direct sunlight for many years. Has a unique molecular structure, which completely seals against moisture and allows elongation and contraction according to extreme temperature changes. Strengthens the existing infrastructure and gives a smooth, uniform and very strong layer (without seams, joints, solders) suitable for regular use including use as a public balcony and/or infrastructure for a roof with a lot of facilities on which maintenance work is done. Seals and bridges across capillary cracks. Fills the gaps between the Iskurit bins and seals perfectly.
Characteristics:
- Flexible extends by 400%< and bridges capillary cracks.
- A perfect sealer from water, repels moisture and prevents penetration of concrete in concrete or tile roofs.
- One-component and easy to apply by spraying – easy to dilute with XL thinner
- Excellent adhesion to tar infrastructure and bituminous sheets – on a water-based epoxy primer.
- The strength of its adhesion enables quality sealing of a flexible membrane over the sealing area.
- Significantly and immediately stops water penetration.
- Easy to apply and dries quickly. Can be applied in a layer 0.5-1 mm per layer.
- Excellent resistance to outdoor conditions, UV resistant.
- Hard and resistant to abrasion, scratches and blows.
- White and repels the sun’s rays and prevents the roof from heating up.
- Very washable and easy to wash.
One-component white elliptical polyurethane for sealing roofs
Uses:
- For sealing and coating particularly large roof areas with pneumatic airless spraying.
- For sealing concrete roofs, tar, bituminous sheets, scum and insulated panel.
- Filling gaps between Iskurit panels and coating Iskurit roof surfaces.
- Thick coating by spraying several layers on the roofs of cooling and freezing rooms.
- For bridging capillary cracks in problematic concrete roofs.
- For underfloor sealing in wet rooms.
- For sealing underground structures before covering with soil.
Technical data:
- Theoretical coverage for roofs – up to 1 kg per square meter per layer, about 0.75 liters per square meter.
- Recommended number of layers – at least 2 with a thickness of up to 0.75 liters per layer.
- Recommended minimum layer thickness for waterproofing Iskurit roofs – 600 dry microns per layer, in 2 layers in total – 1.2 mm dry layer.
- Elongation – 400% < (ASTM D412/EN ISO 527-3
- Density – 1.3-1.4 gm/cm 3 ASTM D1475/DIN 53217
- Solar reflection index SRI: 108 (ASTM method)
- Stiffness – < 10 Dg (Ericsson).
- Amount of solids – about 90%
Packing:
- 5 liters, 18 liters.

For the attention of the user:
This technical specification is for non-binding general information only. also
Produced by Denber Paints and Coatings Israel Ltd. , also
For the complete specification: waterproofing resistant to stagnant water Danversil® Roof Sealer 1
See also Roof Sealing Denbersil Roof Sealer 2
One-component white elliptical polyurethane for sealing roofs
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- Related article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- For a free consultation, call Denber VP Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- To the article Sealing also
- Epoxy floor coating in casting and painting also
- The complete article on the sealing materials for roofs and walls also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Lampert Denbergloss Clear also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794 also