THINNER D-51 for metal-hit paints
Diluent D-51 for Denber Metal Hit hammer effect, smooth, grainy.
Thinner 51 is thinner for the Hammerite paints and Denber Metal Hit paints.
For textured, smooth, and grainy Denver Metal Heat colors by brushing and spraying
THINNER D- 51 – Denber metal hit paints thinner For brushing and spraying.

THINNER D-51 for metal-hit paints www.denber-paints.co.il
Characteristics:
- The melting capacity is perfect for all types of Denber Metal Hit paints.
Uses:
- Suitable for diluting the Hammerite and Denber Metal Hit paints.
Technical data:
- Density – 0.8-0.9 gm/cm 3 .
- Viscosity – 13 seconds.
Containing:
- Solvent mixture
- Does not contain toluene, xylene, turpentine as of 17.01.2022
Color:
- Transparent _
Packing:
- 1, 5, 18 liters
Storage:
- In a cool and shady place at room temperature.
- Make sure lids are tightly closed.
Thinner 51 is thinner for the colors of the Marite and Denver Metal Heat
Shelf Life:
- 24 months in the original packaging.
Safety:
- Flammable, away from sources of heat, sparks and fire.
- Not for food, keep out of reach of children.
- Ensure adequate ventilation during application.
- Wear goggles, gloves, protective clothing.
- Avoid inhaling the diluent fumes.
- In case of injury – seek medical attention immediately.
Warning:
- Do not mix with materials not recommended by us.
- Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention.
Quality Inspection:
- In the laboratories of our factory according to the specification.
- ISO 9001-2015

For the attention of the user:
This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. What is written in this specification is not intended to be used as a substitute for advice/guidance by an authorized consultant/instructor . It must first be applied to a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are made to it, the manufacturer has the right to change it at any time without prior notice. Ask for current versions. Names of professional advisors/instructors can be obtained by phone. You must read the MSDS safety instructions of the product before starting work with it.
Manufactured by Denber Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard.
See also D-11 slow drying thinner (for summer) – Denber Colors
Thinner 51 is thinner for the Hammerite paints and Denber Metal Hit paints.
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- Related article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- For a free consultation, call Denber VP Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- To the article Sealing also
- Epoxy floor coating in casting and painting also
- The complete article on the sealing materials for roofs and walls also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Lampert Denbergloss Clear also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794 also