Tutgum acrylic refrigerators enamel paint

Tutgum acrylic refrigerators enamel paint

In shades for household electrical products.

Quick drying for electrical accessories: refrigerators, washing machines, microwaves, etc.

Tutgum acrylic refrigerators enamel paint www.denber-paints.co.il

Tutgum acrylic refrigerators enamel paint www.denber-paints.co.il

Tutgum acrylic refrigerators enamel paint. WWW.DENBER-PAINTS.CO.IL

Tutgum acrylic refrigerators enamel paint. WWW.DENBER-PAINTS.CO.IL

Characteristics:

  • Ready to use.
  • Suitable for scratch repairs and general painting.
  • Flexible and strong, decorative in many shades.
  • Excellent adhesion.
  • Easy to apply with a brush, spray.
  • Dries quickly.
  • Scratch resistance.
  • UV resistant.

Uses:

  • For painting refrigerators, washing machines, microwaves, etc.

Technical data:

  • Consumption – 100-200 grams per square meter.
  • Coverage – 1 liter per 5-10 square meters (
  • Flexibility – 1 mm (sheen) passes the test of Israeli standard 935 section 307.
  • Solids – 40% (Standard 785 Part 17)
  • Pigments: 65% (standard 785 part 19)
  • Grinding minutes – up to 50 microns (Ti 785 part 15 – up to 60 microns).
  • Density – 1.00-1.25 gm/cm 3  .
  • Resistance to immersion in water – no bubbles, no softening, no change in adhesion, (TI 935 section 312).
  • Resistance to “sweating” (bleeding) – not less than level 6 according to ASTM D-868 and ASTM D-969 Resistance to solvents and fuels – resistant according to ASTM D-2792-93.
  • Viscosity -0.5-1.5 sec (HAAKE)
  • Stiffness – 3 Dg (Ericsson).
  • Abrasion – 120 microns – 1050 cycles (Gardner) ASTM, American standard ASTM D4060 dry film thickness 200 microns, weight loss – 2 grams per 500 cycles (standard – up to 2.5 grams authorized loss).
  • Heat resistance up to 70 degrees Celsius without change in properties and deformation.
  • Recommended number of layers – 2-3.
  • UV resistance – 5 years Accelerated weathering test with exposure to the sun.

In shades for household electrical products

Color:

  • White and any shade.

Gloss:

  • Bright (Ti 935 section 309).

Touch drying :

  • 10-20 minutes.

Drying between layers:

  • 5 hour. Final: 3 hours

Application methods:

  • Brushing, rolling, spraying

Dilution:

  • Brushing – 5-10% thinner D-32
  • Spraying – 10-30% thinner D-32 pressure 3-4 atm.
  • Airless – 5-10% thinner D-32 pressure 5-6 atm nozzle “0.015

Area preparation:

  • Thorough cleaning of dust, grease, dirt, rust. and
  • Rust: polish until removal, paint with an epoxy primer that converts rust. and

Packing:

  • 1 liter, 5 liters, 18 liters.

Storage:

  • In a cool and shady place at room temperature with adequate ventilation. and
  • Make sure the lid is hermetically closed. and

Shelf Life:

  • 12 months in the original packaging. and

Cleaning tools:

  • Thinner 21-D immediately after painting. and

Safety:

  • Not for food, keep out of reach of children. and
  • Flammable, away from heat, fire and sparks. and
  • Ensure adequate ventilation during application. and
  • Wear safety glasses, solvent-resistant gloves, protective clothing. and
  • In case of injury – seek medical attention immediately. and

Warning:

  • Do not mix with materials not recommended by us. and
  • Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention. and

Quality Inspection:

  • in the laboratories of our factory in accordance with specification f
  • ISO 9001-2015 and

This technical specification is for  non-binding general information only. and 

Produced by Denber Paints and Coatings Israel Ltd