Superflex flexible primer
Flexible primer for walls
Elastic primary paint, flexible transparent binding primary superplex
Flexible penetrating acrylic transparent primary paint, part of a superplex paint system and with the same flexibility
Penetrates the wall and builds a solid foundation layer ready for coating with a smooth or granulated superflex layer.
Superflex Flexible transparent binding element

Superflex binding primer www.denber-paints.co.il
Features:
- Penetrating element
- Highly flexible,
- Pure acrylic is resistant to outdoor conditions and long sun exposure. Suitable for external use.
- Excellent sealing capacity.
- “breathable”, allows vapor to pass out, preventing condensation.
- Excellent adhesion capacity for infrastructure.
- High coverage capacity.
- Highly washable and resistant to scrubbing and washing cycles.
- UV resistant and climatic conditions in the country.
- Quick drying, ready to paint with another layer every 4-6 hours depending on ambient temperature.
- Easy to apply when applied and sprayed.
Uses:
- Basic for painting exterior walls for sealing and bridging over capillary cracking.
- Foundation for painting walls and exterior surfaces of concrete, plaster, asbestos, bricks, plaster, etc.’
- As a foundation for coating outdoor surfaces in old buildings.
- As a foundation for coating problematic walls that tend to crack.
- Foundation for renewing old cracked walls.
Elastic primary color, flexible transparent binding primary superflex
Technical Data:.
- Theoretical coverage capacity – 1 liter per 4-5 sqm.
- Effective cover for bridging cracks 2 mm – 1-1.5 kg per square meter. (average 1 liter per square meter))
- Flexibility – 1 mm(sheen)
- Density – 1.2-1.3gm\cm3
- Viscosity – 100,000cPs (Brookfield)
- Stiffness – 3Dg<(Ericsson)
- Tensile strength – 30 kg per square centimeter
- Average adherence strength – 0.72sec
- Expansion coefficient – 1:4
- Average crack bridging capacity before weathering – 4.2 mm
- Average crack bridging capacity after weathering – 1.78 mm
- Stretching old film, 5 years of weathering – 280%
- Recommended number of layers – 3-4
- Recommended number of layers in roller – 3-4, 350-450 microns wet each.
- And the number of layers recommended by spraying – 3-4, 350-450 wet microns each.
- % Solids in volume – 67%
- Abrasion – 120 microns – 760cycles (Gardner) ASTM
- Wash resistance – 1000 cycles without removing the paint as SI 1945
- Scrubbing resistance – 200 cycles as per SI 1945
Elastic primary color, flexible transparent binding primary superflex
Contains:
- Flexible acrylic emulsions.
- Special Flexibility Materials.
- Fungicides, preservatives for outdoor conditions and packaging resistance.
- Wetting and leveling materials.
- Texotropic and Other Supplements.
Color:
- Transparent
Gloss:
- Matte.
Dry to the touch:
- 60minutes.
Dry between layers:
- 6-24 hours depending on layer thickness. Final: 24 hours.
Elastic primary color, flexible transparent binding primary superflex
Application methods:
- scrolling, splashing.
- Do not apply on rainy days to exterior walls.
- Spray – Airless/sprayer 6 overhead tank for smooth coating. Nozzle 3 for orange peel coating.
- Roller – diluting up to 20% water into a smooth layer. No dilution to orange peel.
Application and dilution instructions for bridging capillary cracks:
- Primer layer – flexible transparent binding element superflex
- First layer – 350 microns dry Superflex wall diluted with water 10-30%.
- Additional layers – another 700-800 microns dry. In 2-3 layers for the required thickness.
Space preparation:
- Thorough cleaning from dust, grease, dirt and loose paint.
- In an external wall – washing with water pressure 150 at, removing loose paint and loose parts, repairing baldness and cracks in acrylic debris, and painting the Denbertex primer layer to strengthen the infrastructure. Constructive cracks over 3 mm – expand and deepen, vacuum or exhale and fill with polyurethane polyplex gum.
Primary color:
- Product is a primary color
Elastic primary color, flexible transparent binding primary superflex
packaging:
- 5 liters, 18 liters.
Storage:
- In a cool, shady place at room temperature with adequate ventilation.
- Keep lids hermetically closed.
Shelf Life:
- 12 months in original packaging.
Cleaning dishes:
- Tap water and soap after painting.
Elastic primary color, flexible transparent binding primary superflex
Safety:
- Do not eat, out of reach of children.
- Ensure proper ventilation at the time of application.
- Wear goggles, gloves, protective clothing.
- In case of injury – seek medical attention immediately.
- It is not defined as hazardous material and does not contain substances that require markings or special warnings.
Warning:
- Do not apply at a temperature lower than +5°C. also
- Do not paint outside walls that are damp, wet, and on rainy days. also
- Do not mix with substances not recommended by us. also
- Avoid contact with skin and eyes, causing dryness and skin irritation. On contact, rinse with plenty of running water and seek medical attention. also
Quality Audit:
- In the laboratories we operated according to specifications. also
- ISO 9001-2015 laso
Elastic primary color, flexible transparent binding primary superflex
For user attention:
This technical specification is for general information and non-binding only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. The contents of this specification do not serve as a substitute for advice/guidance by an authorized consultant/instructor. Must first apply to a small area for compatibility testing Before applying large areas, the content of this specification changes over time and updates are introduced, request updated versions. Names of professional consultants/instructors can be obtained by phone. Read the MSDS safety instructions for the product before starting work with it. also
Manufactured by: Denber Paints & Coatings Israel Ltd., P.O.B. 690 Sderot, 80100 certified by the Standards Institution of Israel in accordance with ISO 9001-2015 also
Elastic primary color, flexible transparent binding primary superflex
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- Related article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- For a free consultation, call Denber VP Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- To the article Sealing also
- Epoxy floor coating in casting and painting also
- The complete article on the sealing materials for roofs and walls also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Lampert Denbergloss Clear also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794 also