Roof sealing Aqua flex roof polyurethane
Water polyurethane roof sealing Aqua Flex roof
Aqua Flex roof
AQUA FLEX ROOF POLYURETHANE WATER BASE MEMBRANE – white sealing flexible roof coat

Roof sealing aqua flex roof polyurethane www.denber-paints.co.il

Aqua Flex water-based polyurethane roof waterproofing, www.denber-paints.co.il
Characteristics:
- Flexible and strong to tear.
- Seals the roof and prevents the penetration of rain water.
- Abrasion resistant.
- Extremely washable and resistant to harsh climate conditions.
- Very flexible and does not crack from cycles of expansion in heat and contraction in cold.
- In a white shade to prevent overheating of the roof and the black bituminous sealing if there is one.
- Ready to use after slight dilution with water if necessary and mixing.
- Excellent sealing capacity.
- Excellent adhesion to any roof infrastructure.
- Easy to apply with a roller and/or spray.
- Excellent resistance to outdoor conditions.
- Can be washed to remove dust and dirt and dyed for the purposes of renewal and refreshment.
- quick drying.
- Can be applied in a thick layer of up to 1.5 kg per square meter.
uses:
- for sealing roofs of all kinds.
- To reduce the heat accumulated in the roof and projected to the floor below.
Aqua Flex roof
Technical data:
- Effective coverage – 1 liter per 1 square meter. For each layer. A total of 2 layers – 2 liters per square meter.
- 18 liter bucket for 9-10 square meters
- Flexibility – 1 mm (sheen)
- Density – 1.2-1.3 gm/cm 3
- Viscosity – 1000-3000 s (Brookfield)
- Stiffness – 3 Dg < (Ericsson)
- Tensile strength – 30 kg per square meter.
- Average adhesion strength (adhesion) – 0.72 sec
- Abrasion – 120 microns – 1650 cycles (Gardner) ASTM
- Elongation coefficient – up to 400%
- Solar reflection index SRI: 108 (ASTM method)
- Recommended layer thickness – 1 mm per layer.
- Recommended number of layers – 2
- Amount of solids – 68%
containing:
- High-quality polyurethane emulsion resistant to extreme outdoor conditions.
- Emulsifiers.
- Melanins, pigments.
- UV resistance enhancers.
- Special plasticizers.
- Wetting and leveling agents.
- additives.
variety:
- white
Lightning:
- silk.
Aqua Flex roof
Touch drying :
- 60 minutes in the summer.
Drying between layers:
- 6-8 hours. Final: 24 hours.
Application methods:
- Brushing, rolling, spraying.
- It is recommended to spray at a pressure of 5 atm.
Dilution:
- water.
- Brushing/rolling – 5-10%
- Spraying – first layer 10% second layer – 5%.
Area preparation:
- Thorough cleaning of dust, grease, dirt and loose paint.
- Cleaning with water pressure and drying.
- Opening cracks and filling with polyplex gum.
- Dent repair and hole filling in Denver acrylic putty to obtain a smooth sloped surface.
- Tar/sheet bubble cutting and removal. Filling acrylic putty to zero height.
- Repairs tears, cracks and bald spots in bituminous sheets, with polyplex gum.
primary color:
- Tar roof or bituminous sheets – a layer of aqua flex white roof diluted with water, preferably a transparent aqua epoxy base layer. also
- On existing acrylic sealant, thorough washing and coating 2 layers with Aqua Flex roof. A clear aqua epoxy base coat is preferable. also
- And on an insulated roof/insulated panel – a transparent aqua epoxy base layer. also
- Galvanized tin roof – Totagum Galvan. also
- On steel containers – anticorrosive epoxy primer or on light rust – rust converting epoxy primer. also
Aqua Flex roof
packing:
- 5 liters, 18 liters. also
storage:
- In a cool and shady place at room temperature. also
- Make sure lids are tightly closed. also
Shelf Life:
- 12 months in the original packaging. also
Cleaning tools:
- Soap and water after painting. also
This technical specification is for non-binding general information only. also
For full specifications: water polyurethane roof waterproofing Aqua Flex roof
Aqua Flex roof
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- Related article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- For a free consultation, call Denber VP Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- To the article Sealing also
- Epoxy floor coating in casting and painting also
- The complete article on the sealing materials for roofs and walls also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Lampert Denbergloss Clear also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794 also