Denbertex Asbestos Primer

Concentrated primer penetrating turpentine base Denbartex white primer diluted turpentine – white styrene acrylate copolymer base color penetrating walls and asbestos – fast drying solvent

DENBERTEX – PRIMER  COPOLYMER STYREN ACRYLATE  WHITE SOLVENT BEST ASBESTOS PRIMER

Approved by the Ministry of the Environment for the prevention of asbestos in asbestos roofs

Asbestos paint to stop asbestos fallout – Denbetex Asbestos.

Penetrating primer turpentine base Denbertex white primer for asbestos dilution turpentine – flexible white for asbestos roofs diluted with solvent or mineral turpentine, extremely strong with a unique molecular structure, adhesive and seals perfectly against asbestos fallout and moisture. And reinforces the existing infrastructure and gives a smooth white and very strong layer as a solid preparation for exterior paint Denvercryl 4000.

The only paint that completely prevents the fallout of asbestos from asbestos roofs and walls, breaks down after 70 years. Approved for asbestos painting by the Ministry of Environmental Protection

Characteristics:

• Penetrates deep into asbestos panels and prevents asbestos fallout.
• Flexible and bridges capillary cracks.
• Penetrates deeply and fills grooves and cracks.
• White and creates a preparation for continued painting.
• A perfect seal from water, repels moisture and prevents penetration.
• Strengthens asbestos infrastructure even if it is in a state of disintegration.
• Excellent adhesion to the infrastructure.
• The strength of its adhesion allows a powerful coating.
• Significantly and immediately stops the penetration of rainwater.
• Easy to apply and dries quickly.
• Penetrates deep into the asbestos.
• Ready for repainting and/or coating the same day and even within a few hours in the summer.
• High coverage area – economical paint.

Denbartex Asbestos Primer is a concentrated penetrating primer for penetration into the asbestos board, and prevention of asbestos fallout. For dilution 50% – concentrated white.

uses:

• For crumbling roofs and asbestos panels to stop crumbling and falling out.
• To stop the fallout of asbestos from asbestos slabs

Asbestos paint to stop asbestos fallout – Denbetex Asbestos.

Technical data:

• Theoretical coverage – 1 liter per 10 square meters on a smooth wall.
• Effective coverage – 200-250 grams per square meter.
• And calculated coverage for a corrugated roof (which is not smooth) – 1 liter per 4-5 square meters.
• Flexibility – 1 mm (sheen)
• Density – 1.2-1.3 gm/cm ³
• Viscosity – 20,000 cps (Brookfield)
• Stiffness – 3 Dg (Ericsson)
• Abrasion – 120 micron – 1560 cycles (Gardner) ASTM
• Recommended layer thickness – 200 wet microns.
• Recommended number of layers – 2

variety:

• white

Lightning:

• Matt.

Touch drying :

• 30 minutes.

Drying between layers:

• 2-4 hours. Final: 6 hours.

Application methods:

• Brushing and/or rolling and/or spraying.
• First layer – recommended by spraying pressure 5 atm.
• Second layer – in a roll.
• For perfect sealing – first spray sealer 16 or El Maim 2001 (not siloxane 290)

Asbestos paint to stop asbestos fallout – Denbetex Asbestos.

Dilution:

• Mineral turpentine.
• Brushing and/or rolling – 10-20%
• Spraying – first layer 30% second layer – 5%.

packing:

• 5 liters, 18 liters.