Denbergloss acrylic front doors paint

Denbergloss acrylic front doors paint

Top acrylic polyurethane coating for UV resistant elliptical doors

  • Entrance door color www.denber-paints.co.il

    Entrance door color www.denber-paints.co.il

    Denbergloss Acrylic Polyurethane Paint 2:1, a two-component elliptic top polyurethane paint, hard, multi-solid,  UV resistant   ,  for durability in extremely harsh conditions , especially suitable as a top paint for durability in severe  and difficult outdoor conditions for many years for painting doors in general and entrance doors in particular.

Denbergloss acrylic front doors paint www.denber-paints.co.il

Denbergloss acrylic front doors paint www.denber-paints.co.il

DENBERGLOSS ACRYLIC 2:1   – POLYURETHANE TWO COMPONENT  TOP COAT PAINT FOR EXTERNAL USE, DURABILITY FOR HARD DEMANDS. FOR PAINTING DOORS.

Danbergloss acrylic top polyurethane paint Elliptical polyurethane paint –   hard top polyurethane paint in a selection of shades, glossy/matte/silky, smooth or rough decorative and resistant to exterior painting of all types of doors, especially entrance doors and doors in general, for strong resistance to mechanical and chemical abrasion and particularly harsh climatic conditions. Very smooth – dust repellent, or rough. Can be applied in several layers. Does not fade or disintegrate even with long exposure to the sun.

Characteristics:

  • Smooth and hard or rough finish to choose from.
  • Flexible for bending and hard for abrasion.
  • Very washable and repels dust and dirt.
  • High hardness, suitable for painting entrance doors that are exposed to a lot of wear and tear.
  • Resistant against impacts and scratches.
  • Excellent adhesion to the infrastructure.
  • Easy to apply.
  • UV resistant, chemical resistant.
  • Heat and cold resistance.
  • Very high gloss or other on demand, durable for many years.
  • quick drying.

Top acrylic polyurethane coating for UV resistant elliptical doors

uses:

  • As a protective top coat of paint for entrance doors, even those exposed to direct sunlight.
  • For painting doors in general.

 Technical data:

  • Theoretical coverage – 1 liter per 10-15 square meters.
  • Recommended layer thickness 40-50 dry microns.
  • Recommended wet layer thickness – 80-100 microns.
  • Base to hard ratio – 2:1
  • Shine at 60 0  – shiny 80% <, silk 15-45%, matte 5% >
  • Pot life = working time from the moment of mixing B+A – 6> hours.

variety:

  • All RAL shades,
  • Any shade from any catalog or by sample.

Lightning:

  • Glossy, matte, silky.
  • smooth or rough.

Top acrylic polyurethane coating for UV resistant elliptical doors

Drying between layers:

  • For another layer – 30 minutes, hard drying – 8 hours, final drying – 12-16 hours.

Application methods:

  • Brushing, rolling, spraying.

Dilution:

  • To spray – 10-35% thinner 11 – D pressure 3-4 at’.
  • Brushing/rolling – can be applied without dilution or up to 20% in thinner 11 – D if application streaks or “orange peel” are formed during application.

Area preparation:

  • Thorough cleaning of dust, grease, dirt and loose paint.
  • Rubbing with glass wool to remove grains and blowing with air pressure.
  • Filling large holes and depressions with epoxy putty.
  • Preparing an area for painting with a white base putty that rubs off.
  • Primer repairs or a new primer with “epoxidan 19 HB (Sulcot)

primary color:

  • Epoxidan 19 HB (Sulcot). or any other epoxy or polyurethane primer

packing:

  • 3.4+1.6 = 5 liters.

This technical specification is for non-binding general information only. and

Produced by Denver Paints and Coatings Israel Ltd

For full specifications:  Danbergloss acrylic front door paint