Denbergloss metallic chamillion car paint

Metallic chamillion direct shine for the car

Direct shine for the car – two-component glossy elliptic metallic top polyurethane paint, hard, multi-solid, UV resistant, scratch resistant, for durability in particularly harsh conditions for many years, especially suitable as a top paint for cars for durability in severe and difficult outdoor conditions for many years. Can be painted with one final layer or with the addition of a layer of car varnish on top. Does not fade or disintegrate with long exposure to the sun.

DENBERGLOSS METALIC CHAMILLION FOR CAR PAINTING POLYURETHANE TWO COMPONENT TOP COAT PAINT FOR EXTERNAL USE, DURABILITY FOR HARD DEMANDS

Characteristics:

• Spectacular smooth glossy and hard metallic finish.
• Flexible for bending and hard for abrasion.
• Very washable and repels dust and dirt.
• High hardness, suitable for painting vehicles that come in contact with a lot of wear and tear.
• Strengthens the paint system against damage and scratches.
• Excellent adhesion to the infrastructure.
• Resistant to scratches and mechanical damage.
• Easy to apply.
• UV resistant, chemical resistant.
• Heat and cold resistance.
• Very high gloss, durable for many years.
• quick drying.
• Does not contain cadmium, and contains lead up to % 0.06 as permitted. Does not contain chromates.
• Produced in any metallic shade from any car catalog and also top clear lacquer for a final finishing layer.

Uses:

• As a decorative metallic top layer in shades for painting vehicles.
• As an intermediate layer before a final HS lacquer layer.

Metallic direct shine for the car

Technical data:

• Part A – can be mixed by hand easily and after 5 minutes you will get a uniform and smooth solution.
• Part B – will be transparent and clear.
• Storage durability – 24 hours at 570 without separation and spoilage,
• Theoretical coverage – 1 liter per 10-15 square meters.
• Hiding capacity – all colors < 0.95 in a dry layer of 58 microns
• Recommended layer thickness 40-50 dry microns.
• Recommended wet layer thickness – 80-100 microns.
• Flexibility – 1 mm (sheen)
• Density – 1.1-1.3 gm/cm3 (varnish 0.9 colors up to 1.3)
• Viscosity B+A – 17-23 seconds in 2 #
• Stiffness – 10 Dg < (Ericsson)
• Abrasion – 120 micron – 4200 cycles (Gardner) ASTM
• Base to hard ratio – 2:1
• Durability time of diluted paint in the package – 6 hours (viscosity increase no more than 6 seconds from original viscosity)
• Shine at 600 – brilliant shades 95%
• Pot life = working time from the moment of mixing B+A – 6> hours. and
• Salt cell 2000 hours – no corrosion. and
• Thermal market – no loss of adhesion. and
• % solids by volume – shiny % 66.6 f
• The tourism test and compliance with radiation under accelerated conditions for this product: 1,200 hours in a Q-Pannel with a UVA-340 lamp in cycles of 8 hours of light at a temperature of 600 and 4 hours at a temperature of 500, the paint passed the test successfully with minimal color changes and without any damage to the mechanical properties . Tested according to ASTM D-4587-91 • This test was conducted at the Ministry of Defense – Materials Laboratory and is attached to this specification. and

Gloss:
• Shiny. 

Packaging:
• 3.35+1.65 = 5 liters. and

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and

For the full specification:  Denbergloss metallic car paint direct to the car