Acryl Car acrylic car paint

Smooth and decorative top paint, one-component acrylic solvent, for painting vehicles, with extremely fast drying  to prevent leaks and fast application, with excellent adhesion to primers and putties of all kinds for vehicles.

ONE COMPONENT ACRYLIC PAINT FOR CARS  Vehicle fast drying top coat paint.

Extremely strong, suitable for extreme outdoor conditions in which the vehicle is located. Suitable for years for direct exposure to the sun as well as extreme cold and heat. Gives the car a smooth and beautiful finish. Produced in many shades. A layer of Dunbargloss Clear Polyurethane Direct Shine or Acrylic Car Lacquer should be applied.

Characteristics:

• Hard resistant to scratches and many washing cycles.
• Flexible to vibrations and does not crack easily.
• In a variety of smooth and metallic shades.
• Repels moisture and prevents penetration.
• Resistant to extreme cold and heat cycles.
• Excellent adhesion to the infrastructure.
• UV resistant
• Easy to apply and dries quickly.
• Ready for repainting and/or repair on the same day and even within a few hours in the summer.
• High coverage area – economical paint.
• Does not contain lead, mercury, cadmium.

uses:

• For painting vehicles, mobile equipment, trains, etc.

One-component acrylic paint for cars – Acryl Car

Technical data:

• Theoretical coverage – 1 liter per 8-15 square meters depending on the shade and shade of the base color.
• Flexibility – 1 mm (sheen).
• % solids – 50% <
• Density – 0.9-1.3 gm/cm ³  .
• Viscosity – 20,000 cps (Brookfield).
• Stiffness –>3 Dg (Ericsson).
• Abrasion – 120 micron – 1560 cycles (Gardner) ASTM
• Recommended layer thickness – 50-120 wet microns.
• Recommended number of layers – 2

containing:

• Special acrylate.
• Melanins, pigments.
• Special plasticizers.
• Wetting agents and LEVELING
• Solvents, additives.

variety:

• In any shade and from any car paint catalog.

Lightning:

• Shiny – silk.

Touch drying :

• 10 minutes. (Due to the rapid drying that prevented over spray “dust” during spraying).
• If “dust” is formed during spraying, retarder should be added and air pressure to the sprayer should be reduced.

Drying between layers:

• 30 minutes. Final: 2 hours. Final difficulty: 24 hours.

Application methods:

• splash.

Dilution:

• Dilutes XL up to 70% as needed and without leaks.

Area preparation:

• Thorough cleaning of dust, grease, dirt and loose paint. and
• Rubbing the base color with sandpaper to remove grains and blowing with air pressure. and
• Filling large holes and dents with car polyester putty. and
• Filling nozzles with Denver filler and rubbing with glass wool. and

primary color:

• Dunbar one-component acrylic filler or Dunbar Duke putty or two-component compact putty. and

packing:

• 1 liter, 2.5 liters, 5 liters and

This technical specification is for  non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd., PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard

For full specifications:  Acryl Car one-component acrylic car paint

See also: Acrylic Car Filler for car filler primer