Epoxyden 7100 electrical insulation paint

Thick epoxy paint for electrical insulation

Epoxyden 7100 electrical insulation paint www.denber-paints.co.il

Epoxydan 7100 for electrical insulation  thick epoxy paint for electrical insulation 2.5:1

Hard top two-component epoxy   paint , 85% solids , for interior and exterior painting, for resistance to particularly difficult conditions including direct exposure to the sun and rain, especially suitable as a top protective coating for electrical insulation of electrical poles, electrical and electronic systems exposed to water and moisture to prevent short circuits, as well as for systems that are in motion for fixation and protection from physical damage that can be caused by vibrations and mechanical blows.

EPOXYDEN 7100 (2.5:1)    – HEAVY DUTY EPOXY TWO COMPONENT  TOP COAT PAINT for electrical insulation

Epoxy paint for top electrical insulation hard transparent/in shades, decorative smooth and durable. For protective coating of electrical poles and all types of electrical systems and stationary and mobile electronic equipment for insulation and sealing from moisture and water as well as from damage caused by vibrations of transformers and the like, for firm resistance to mechanical and chemical abrasion and particularly harsh climatic conditions. Very smooth, dust repellent, can be applied in several layers. Does not fade even with long exposure to the sun. Insulates electricity and prevents the passage of electricity on the coated surface to prevent electrocution and/or short circuit. Can be painted directly on light rust.

Characteristics:

• Excellent electrical insulation capacity.
• Smooth and hard finish.
• Very washable and repels dust and dirt.
• High hardness, suitable for outdoor conditions such as electrical poles, electrical cabinets, street lighting poles, electronic assemblies and electrical equipment and accessories.
• Excellent adhesion to the infrastructure.
• Resistant to scratches and mechanical damage.
• Anticorrosive, can be applied to light rust.
• Easy to apply, you can get a thick coating in one layer by spraying.
• Chemical resistant.
• Heat and cold resistance.
• Does not contain cadmium, lead, chromates.

Uses:

• As a protective paint layer and electrical insulation for power poles.
• As a protective paint layer and electrical insulation for foundations and concrete bases of electricity poles.
• And as an upper layer for electrical insulation of systems that may come into contact with water or high humidity and transmit electricity that can endanger human life and/or cause a short circuit.
• For painting accessories and parts that produce/transmit electricity and mobile/permanent ground equipment that produces electricity.

Thick epoxy paint for electrical insulation

Technical data:

• Layer thickness – no thickness limit.
• Abrasion – 120 microns – 3600 cycles (Gardner) ASTM
• Base to hard ratio – 2.5:1 by volume
• Barak at 60 ⁰  – silk 15-45%
• Pot life = working time from the moment of mixing B+A – 4 hours at an ambient temperature of 25 degrees Celsius.
• % solids – 85%
• Pull off test – 845 psi ASTM-D4541-95
• Electrical insulation (dielectric strength) at a temperature of 18-22 degrees – 30 kilovolts per mm – passes.
• Dielectric strength for voltage breakdown for a dry layer 25 microns – KV/mm 150 (ASTM-D-149)
• Cutting corrosion test – coupon 100x 150 film thickness 150 microns: 0 mm grade 10 Table1-1654-00-ASTM

Colors:

• Cloudy transparent, brownish red, mustard yellow

Gloss:

• silk

Touch drying:

• For a layer of 250 microns – 2-4 hours at an ambient temperature of 20-30 degrees.

Packing:

• 3.6+1.4 = 5 liters

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and

For the full specification:  Epoxy 7100 electrical insulation