Denway aqua acrylic 

Characteristics:

• “Green” color without thinners.
• Striking color and visible from a long distance, resistant to outdoor conditions.
• Flexible and hard at the same time. Penetrates deep and fills grooves and cracks in asphalt and concrete.
• Perfectly resistant to water, suitable for winter and heavy rains, does not fall apart.
• Excellent adhesion to the infrastructure.
• The strength of its adhesion allows coating with glass balls.
• Easy to apply and dries quickly.
• Resistant to abrasion and scratches and the heat of the asphalt in the summer.
• Resistant to fuels and oils.
• Quick drying, ready for repainting and/or coating on the same day and even within a few hours in the summer if necessary. Its quick drying allows the opening of a road in up to 30 minutes.
• High coverage area – economical paint.
• Diluted with water No need for thinners – economical.

Uses:

• For asphalt and concrete road markings on urban and interurban roads.
• For marking sidewalks and traffic islands.
• and to mark parking lots.
• and for painting crossings.
• For painting warehouse floors, shelters, garages, etc.

Dunway aqua acrylic –  1871 for marking roads

Technical data:

• Theoretical coverage – 1 liter per 10 square meters.
• Consumption for a new road – 1 liter per 1.3-2.0 m2 depending on the type of asphalt
• Consumption for painting over old paint – 1 liter per 2 square meters
• % solids by volume – 70% (T.I. 785 part 17).
• Density – 1.45-1.6 gm/cm ³
• Abrasion – 120 microns – 1050 cycles (Gardner) ASTM, American standard ASTM D4060 dry film thickness 200 microns, weight loss – 2 grams per 500 cycles (standard – up to 2.5 grams authorized loss)
• Recommended minimum layer thickness – 500 wet microns. The thickness was tested correctly – 720 grams per square meter.
• Recommended number of layers – 1
• Recommended amount of glass balls – 400 grams per square meter swarco/sovitec.

Color:

• White, yellow, orange, blue, red, black.

Gloss:

• matte up to 18%

Touch drying :

• 15 minutes. (Due to the quick drying, avoid overspray “dust” during spraying), drying time on a wheel – (T.I. 935 Section 304 Amendment No. 2) – up to 45 minutes

Road opening times for traffic:

• In the summer – 30 minutes. and
• In winter – 45 minutes. and

Application methods:

• Spraying, rolling, brushing. and

Dilution:

• Brushing/rolling – 0-5% water and
• Spraying – 5-20% water, 3-4 atm pressure
• Airless – 0-5% water, nozzle “0.018 – for a thin layer. nozzle “0.021 – for a thick layer. and