Denbergloss glow at night

Denbergloss glow at night

Denberglos emits light that turns on in the dark

Glow in the dark – transparent yellow greenish abrasion-resistant polyurethane paint lights up in the dark

Greenish yellow transparent polyurethane paint that emits light in the dark.

Glow-in-the-dark glow-in-the-dark Danberglus glow-in-the-dark glow-in-the-dark color/varnish – two-component elliptical polyurethane paint/varnish with a hard top that glows in the dark, for painting floors, walls, vehicles, plastics and metals. Absorbs light in the light and emits it in the dark. Can be painted in several layers to obtain a large light storage capacity. Sunlight-sensitive paint that must be applied on a white epoxy or polyurethane base and covered with a layer of varnish for UV protection.

DENBERGLOSS POSFLOURESCENT – POLYURETHANE TWO COMPONENT LIGHT EMITTING PAINT, GLOW AT NIGHT.

Denbergloss glow at night. www.denber-paints.co.il

Denbergloss posphlourescent glow at night. www.denber-paints.co.il

Characteristics:

Glows in the dark when the light is turned off and enables identification in the dark.
Enables escape and orientation in an emergency.
Elliptical color with a smooth and hard finish.
Very washable and repels dust and dirt.
High hardness.
Resistant to scratches and light mechanical damage, abrasion resistant.
UV resistant, resistant to various chemicals and solvents.
The luminous pigment is sensitive to direct exposure to the sun and tends to emit less and less light, such areas must be repainted after the pigment fades.
Heat and cold resistance.
Very high gloss.
quick drying.
Flexible for bending and hard for abrasion.
Excellent adhesion to the infrastructure.
Easy to apply.
Resistant to all external conditions, even freezing.
Must be painted on a suitable white base.

Uses:

As a color for marking emergency escape hatches and various markings in the dark.
As a color for direction and warning signs in the dark.
Paint for marking roads and travel routes for cars and forklifts.
For painting floor areas in industry to mark areas and separate them for pedestrians and forklifts.
For night lighting for saving electricity and for beauty.

Greenish yellow transparent polyurethane paint that emits light in the dark.

Technical data:

Theoretical coverage – 1 liter per 10 square meters.
Practical coverage for required thickness – 1 liter per 5 square meters.
Recommended wet layer thickness – 200 dry microns.
Recommended dry layer thickness – 125 microns.
Recommended number of layers – 2 minimum (for walls 2 layers of 60 microns)
Flexibility – 100 micron film 1 mm (sheen)
Density – 1.1-1.2 gm/cm3 (varnish 0.9 colors up to 1.2)
Average viscosity A+B– 1-2 Pa.sec
Viscosity of glossy colors B+A – 17-23 seconds in 2 # (95 carb
Stiffness – 10 Dg hours.
Resistance to distilled water 24 hours – without loss of adhesion or corrosion one hour after removal from the liquid.
Hydrocarbon resistance – no loss of adhesion one hour after removal from the liquid.
and oil resistance 1250 24 hours at OC 121 – without loss of adhesion 4 hours after removal from the liquid.
and hydraulic oil resistance 24 hours at OC 66 – no loss of adhesion 4 hours after removal from the liquid
Resistance to jet fuel – 7 days at room temperature – no loss of adhesion 4 hours after removal from the liquid
Heat resistance – O C121 for 60 minutes. No tone changes up to delta E =1.
Humidity chamber – 30 days in 100% humidity at a temperature of OC49 without loss of adhesion or damage to the film one hour after removal from the liquid
Salt cell – 500 hours without the appearance of corrosion.
Thermal market – no loss of adhesion.
% solids by volume – shiny % 66.6

Gloss:
• Glossy, matte, silky.

Packaging:
• 3.35+1.65 = 5 liters. 5+2.5 = 7.5 liters, 10+5 = 15 liters.

This technical specification is for non-binding general information only. and
produced by Denber Paints and Coatings Israel Ltd. ,

For the full specification: light emitter turns on in the dark Denberglos emits light