Glass paint Aqua-Flex XK90
Water-based acrylic paint for painting glass
GLASS COAT AQUA – FLEX XK90 acrylic polyurethane water base translucent/tinted paint for glass
Characteristics:
- Excellent adhesion to glass.
- In shades resistant to the sun and outdoor conditions.
- Green product – one-component water color easy to apply.
- Economical, for painting in a thin layer
Uses:
- For painting glass items for decoration.
- for painting vintage glass
- and for exterior painting of car windows to create a dark layer that blocks light rays.
Technical data:
- Effective coverage – 1 liter per – 8-10 square meters.
- Flexibility – 1 mm (sheen)
- Density – 1.0-1.2 gm/cm3
- Viscosity – 1000-3000 Pa.s (Brookfield)
- Stiffness – 10 Dg < (Ericsson)
- Abrasion – 120 microns – 1450 cycles (Gardner) ASTM
- Recommended layer thickness – 125-150 wet microns.
- Recommended number of layers – 1-2
Water-based acrylic paint for painting glass
Containing:
- High-quality acrylic polyurethane emulsion resistant to extreme outdoor conditions.
- Melanins, opaque color pigments.
- Pigments T. Transparent iron for non-opaque transparent shades.
- Special plasticizers.
- additives.
Color:
- Clear
- Opaque shades
- Semi-transparent shades
Gloss:
- Shiny/silky.
Touch drying :
- 60 minutes. (Due to the quick drying, avoid overspray “dust” when spraying)
- If “dust” is formed during spraying, retarder should be added and air pressure to the sprayer should be reduced.
Drying between layers:
- 6-8 hours. Final: 24 hours.
Application methods:
- Brushing, rolling, spraying.
- It is recommended to spray at a pressure of 5 atm.
Dilution:
- water.
- Brushing/rolling – 10-20%
- Spraying – first layer 30% second layer – 5%.
Area preparation:
- Thorough cleaning of dust, grease, dirt and loose paint.
- Rubbing with glass wool to remove grains and blowing with air pressure.
Primary color:
- the color itself
Packing:
- 5 liters, 18 liters.
Storage:
- In a cool and shady place at room temperature.
Shelf Life:
- 12 months in the original packaging.
Cleaning tools:
- Soap and water after painting.
Safety:
- Not for food, keep out of reach of children. and
- Ensure adequate ventilation during application. and
- Wear safety glasses, solvent-resistant gloves, protective clothing. and
- In case of injury – seek medical attention immediately. and
Warning:
- Do not mix with materials not recommended by us. and
- Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention.
Quality Inspection:
- In the laboratories of our factory according to the specification. and
- ISO 9001-2015 and
Produced by Denber Paints and Coatings Israel Ltd