Glass brick protector 100

Glass brick protector 100

Protector for glass bricks Glas Protector 100

Glass bricks anti-fracture coating

Professional transparent/various coating for the protection of glass bricks, two-component, Denbergloss 100% solids

GLASS PROTECTOR 100  CLEAR SOLVENTLESS POLYURETHANE DENBERGLOSS 100% SOLIDS GLASS COATING

Glass brick protector 100 www.denber-paints.co.il

Glass brick protector 100 www.denber-paints.co.il

Glas Protector 100 glass block protector –  designed to coat glass blocks in the food industry, fill cracks, strengthen them against breakage and prevent glass from scattering in the event of a crash . The coating creates a protective cover designed to stop the scattering of glass fragments in the production hall in the event that the glass bricks crash for various reasons. Without the coating, the glass shards scatter in a radius of about 10 meters and pose a risk to human life, may penetrate the food during the production process and cause the shutdown of production. (Food contaminated with broken glass is destroyed, which causes significant financial damage).

Characteristics:

  • Coats glass bricks and prevents the scattering of glass pieces in the event of shattering.
  • Flexible and bridges capillary cracks.
  • Penetrates deep into the microscopic grooves and cracks in the glass and fills and strengthens.
  • Transparent and clear as water.
  • The strength of its adhesion to glass allows for a thick coating.
  • Noticeably and immediately stops the scattering of glass during shattering.
  • Ready for recoating, same day.
  • UV resistant
  • The coating is based on a unique 100% solids polyurethane that is inert, non-toxic, does not contain solvents or other diluents and is very suitable for the food industry.
  • The coating is odorless.
  • The polyurethane creates a strong and abrasion- and scratch-resistant coating and has a built-in molecular flexibility suitable for its purpose.

Uses:

  • For a protective coating for glass bricks.

Glass bricks anti-fracture coating

Technical data:

  • Touch drying time – 5 hours, initial drying – 12 hours, final drying – 24 hours.
  • Final difficulty – 7 days
  • The coating is flexible – 1 mm SHEEN
  • Elongation (ELONGATION) – 12%
  • Transparency – clear as water
  • SHORE D – 85 hardness (ASTM D2240)
  • Abrasion resistance – 4200 cycle Gardner
  • Material loss in wheel wear 1 kg in 1000 cycles – 25-30mg (ASTM D4080)
  • The viscosity of the mixture – 900 CPS
  • Pot life – 60 minutes
  • solids – 100%
  • Mixing ratio – 2:1
  • Tensile strength – kg/mm ​​2  4 < (ASTM D638M)

Containing:

  • Polyurethane 100% solids.
  • Special plasticizers.
  • Deep penetration materials.
  • additives.

Color:

  • transparent standard.
  • In UV resistant shades.

Gloss:

  • silk.

Touch drying :

  • 5 hours

Drying between layers:

  • 5-12 hours depending on the ambient temperature.

Application methods:

  • Dispersion technique to create a uniform layer. and

Dilution:

  • No thinners – 100% solids. and

Area preparation:

  • Thorough cleaning of dust, grease, dirt and loose paint. and
  • Rubbing with “Zero” sandpaper and removing airborne grains with air pressure or damp wiping. and
  • Filling large holes and depressions with foamed polyurethane. and
  • Filling constructive cracks with a thick solution of Glas Protector. and

Primary color:

  • There is no need for primer, the coating is SELF PRIMERING and

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd., PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard and

For full specifications:  protector for glass bricks Glas Protector 100