Primer/intermediate/top epoxy paint

Epoxy, one paint, a multi-thickness intermediate and top anticorrosive primer, one paint, and enough.

Epoxy paint one layer and quite basic, mid. and top

Anticorrosive, two-component, multi-thickness epoxy base, intermediate and top paint for spraying, for multi-thickness application with the same paint, applied in two layers of 150 microns each and together 300 microns dry. For painting ferrous metals and other light alloys.

EPOXYDEN PRIMER AND MID. AND TOPCOAT LAYER ANTI-CORROSIVE HIGH BUILD EPOXY PAINT FOR SPRAYING, TWO LAYERS 150 MIC DRY EACH

Primer/intermediate/top epoxy paint www.denber-paints.co.il

Characteristics:

Contains anti-rust, can be sprayed on ferrous and non-ferrous metals in two layers to finish required thickness.
Can be sprayed thick giving 150 microns dry layer per sprayed layer.
A very thick basic, intermediate and top paint with mechanical strength and high adhesion to steel.
Anticorrosive and prevents the development of rust.
Creates a suitable preparation for continued painting with elliptical polyurethane paint for exposure to the sun.
Resistant to alkaline solutions and mixed acids and abnormal humidity conditions.
Excellent adhesion to the infrastructure. Also used as a bridging layer over old epoxy paint before painting with a new top coat.
Easy to apply and dries quickly.
Ready for repainting and/or coating with a top layer the same day after 12 hours.
Resistant to fuels and oils including jet fuel.
Heat resistant from 100 to 200 degrees in aluminum shade.

Uses:

As a base and intermediate and thick and strong top for ferrous and non-ferrous steels in marine and/or chemical atmospheres.
Proper mechanical preparation (resistance to abrasion and mechanical blows) for top colors.
As a foundation and intermediate for concrete buildings and steel constructions for the beach and in the chemical industry.
for vehicle and transport chassis.
For strengthening exterior infrastructure before painting as an intermediate layer and a foundation for a new top layer of paint.
As a foundation, intermediate and top for frame parts, machinery in industry, tin and steel parts, etc.
As a primer and intermediate before a top color Dunbargloss Acrylic Elliptical for exposure to the sun.
For contractor painting in Airles of large areas.

Epoxy paint one layer and quite basic and top

Technical data:

Coverage – 1 liter per 3-5 square meters in a layer of 300 dry microns.
Flexibility – 4 mm (sheen)
Density – Part A 1.35-1.45 gm/cm ³ , Part B 0.85-0.95 gm/cm ³ (1475 (ASTM D
Viscosity – part A about 90 kerbs part 2 about 45 kerbs (10% + )
Stiffness – 10Dg> (Ericsson)
Flash point -38 ⁰ Celsius
Amount of solids – part A by weight 82%, part B by volume 72% (ASTM-D-2369)
Abrasion – 300 microns – 4560 cycles (Gardner) ASTM
Recommended layer thickness – 200 wet microns. 150 microns dry
Recommended number of layers – 2
Hard drying time – 24 hours.
Pot life (working time from the moment of mixing A with B) – 5 hours.
Mixing ratio A:B – 1:1 by volume. or 2.5:1

Color:

Grey, red brown.
Made to order in colors from the RAL catalog,

Gloss:

Matt. 10-30% (ASTM D 523)

packing:

2.5+2.5= 5 liters, 3.6+1.4= 5 liters, 2.5+5 = 7.5 liters, 13+5=18 liters.

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard and

For the full specification: basic/intermediate/upper