EPOXYDEN POLYURETHANE ELASTIC SOLVENTLESS

EPOXYDEN POLYURETHANE ELASTIC SOLVENTLESS

Multi-thick flexible polyurethane epoxy

Multi-thick and multi-solid elastic coating and sealing

Multi-thickness paint 100% solids flexible for application 300 microns per layer.

Flexible hybrid polyurethane epoxy with 150% elongation, chemical resistant, two-component multi-thickness, strong and thick for painting in thick layers of 300 microns in each layer. No final thickness limit. Until the required thickness is obtained by airless spraying. Provides a very thick and strong layer with flexibility that prevents cracking. For flexible coating of infrastructures that tend to crack, fills existing cracks and crevices and creates flexibility and chemical resistance in floors and walls in the chemical industry and in concrete containments for chemicals, pipes and tanks. Provides chemical and mechanical protection from blows and physical injuries. Abrasion resistant. Its flexibility dampens equipment and machinery vibrations in the chemical industry in particular and industry in general. Bridges cracks and seals against chemical penetration. Rigid, 100% solids, for resistance in particularly harsh conditions and severe abrasion, suitable for coating arresters including storage boilers and tanks with concentrated acids. Suitable for the chemical industry in a wet and humid environment with vapors/splashes and acid spills.

EPOXYDEN POLYURETHANE ELASTIC  – SOLVENTLESS  EPOXY POLYURETHANE FOR COATING AND FILLING AREAS WITH  AND AGAINST CRACKS, CONCRETE STITCHES AND WALLS AND FLOOR JOINTS

EPOXYDEN POLYURETHANE ELASTIC SOLVENTLESS www.denber-paints.co.il

EPOXYDEN POLYURETHANE ELASTIC SOLVENTLESS www.denber-paints.co.il

Multi-thick and multi-solid elastic coating and sealing

Characteristics:

  • Suitable for airless spraying in layers of 300 microns per layer.
  • Flexible 150% elongation, resistant to vibrations and bridging cracks.
  • Thick and resistant to mechanical blows.
  • Rigid, resistant to shocks and abrasion.
  • Prevents the development of cracks in concrete joints between walls and floors.
  • Seals and prevents the passage of moisture, water, chemicals into the concrete and damage to it and the rebar and thereby prevents rust and swelling that break down the concrete and cause it to weaken and loosen.
  • Resistant for a long time to acids and bases, resistant to most solvents and fuels, resistant to fresh and salt water, resistant to sewage and industrial waste streams, resistant to oils and fuel oil and provides excellent chemical protection with flexibility. (see resistance table at the end of the technical specifications)
  • Scratch resistant and protects and provides a very smooth and washable surface. and
  • Suitable for contact with drinking water, does not emit any toxins. Does not contain chromates and does not contain isocyanates. and
  • Protects and prevents the attack of the coated surface on which concentrated corrosive acids are spilled. and
  • A smooth and hard finish for concrete and steel floors and/or stops and/or rollers in battery and/or chemical rooms, easy to wash and allows for an extremely high level of cleanliness. and
  • Excellent adhesion to epoxy flour primer. and
  • Easy to apply with a roller and spray
  • Heat and cold resistance. and
  • Does not contain cadmium, lead, chromates. and

To the old site: http://www.denber-paints.co.il

This technical specification is for non-binding general information only. 

For the full specification:  multi-thick flexible polyurethane epoxy