Epoxyden Ship Corborundum Reservoir Abrasive

 A two-component epoxy corborundum ( SILICON CARBIDE ) coating , a base and a hard top resistant to abnormal wear, 100% solids, for interior painting of warehouses, tanks and tanks and feed and emptying piping, for resistance to particularly harsh wear conditions, due to high-intensity and high-frequency flows of liquids and chemicals, including bodies and particles Hard ones that scratch and wear the pipes and tanks. Particularly suitable as a protective coating against physical damage that can be caused by mechanical erosion of liquids containing sand or stone or metal particles.

The high corborundum content creates a self-coating close to diamond.

EPOXYDEN SHIP RESERVOIR ABRASION  – 100% SOLIDS EPOXY  PRIMER AND TOP COAT FILLED WITH CARBORUNDUM MAKES IT DURABLE FOR ABRASION WITH TOUGHNESS CLOSE TO DIAMOND

Special polyamine epoxy paint/coating for abrasion resistance that no other chemical coating can withstand. For strong resistance to mechanical and chemical abrasion, very smooth, very washable, due to the high content of corborundum powders, low surface tension and can be applied in many layers before reaching final hard drying. Resistant to most types of acids and bases, can be sprayed with one layer of 650 micron dry film.

Suitable for a highly aggressive corrosive environment in class  C5-I and meets the requirements of the ISO 12944-6  standard   for chemicals  ( ISO 2812-1 ) , humidity chamber  ( ISO 6270 ) , salt chamber  ( ISO 7253 )  for the grade:  DURABILITY RANGE – HIGH

Epoxy corborundum paint is extremely hard wear resistant

Characteristics:

• Abrasion resistance is close to the strength of a diamond. Perfectly protects the infrastructure on which it is painted against erosion. Extremely high mechanical strength.
• Taxotropic and can be applied in thick layers.
• Resistant to immersion – in fresh, distilled, salty water, sea water, industrial sewage, basic and acidic chemicals. In fuels, oils and most types of solvents.
• Resistant to dry heat of 200 degrees for short periods and 150 degrees for long periods.
• Resistant to hard blows and scratches.
• Smooth and hard finish.
• Very washable and dirt repellent.
• High surface tension, extremely high hardness.
• Excellent adhesion to steel infrastructure after sandblasting.
• Resistant to scratches and repeated mechanical damage.
• You can get a coating of any thickness in one layer by applying/casting.
• Chemical resistant.
• Heat and cold resistance.

uses:

• As a thick protective layer for coating the interior of coal storage cells and aggregates, oil tankers into which crude oil containing hard foreign bodies and acids such as sulfuric acid in a very high concentration is injected. This process is a particularly abrasive process.
• For painting the interior of the ballasts on the ship, seawater is pumped and emptied in strong flows and at high rates.
• For interior painting pipelines that carry crude oil to the refineries.
• and for interior painting of oil, fuel and chemical reservoirs.
• and for coating the interior of cooling towers where water flows all the time and erodes the surface area.
• For interior painting of pipelines carrying chemicals, sewage, liquid waste with solids,