Epoxy ship phenolic primer/topcoat
Epoxyden Ship Phenolic PH top primer/topcoat multi-thickness phenolic chemical resistant epoxy

Two-component, multi-solid epoxy phenolic paint for ships, from the POWER HD paint series for painting tanks, pipes and steel and concrete surfaces and others that come in prolonged contact with chemicals and fresh, salty and other water. Suitable for interior painting of tanks and pipes that regularly store and transport water, various chemical liquids, in the storage and transportation of chemicals in the chemical industry, suitable for chemicals and fuels such as diesel, fuel oil, and DSL, various fuels and solvents as well as for coating their containments without exposure to the sun. Suitable for resistance in an aggressive corrosive atmosphere Grade C5-I and conforms to the ISO 12944-6 standard for chemicals ISO 2812-1 , moisture chamber ISO 6270 , salt chamber ISO 7253 , for resistance in the HIGH degree
EPOXYDEN SHIP PHENOLIC HD PRIMER AND TOPCOAT – FOR COATING LINING TANKS, INTERNAL MACHINES COATING, RESERVOIRS AND PIPES FOR OILS, SOLVENTS AND CHEMICALS
Epoxyden Ship Phenolic PH top primer multi-thickness phenolic chemical resistant epoxy
Characteristics:
- Resistant to acids, chemicals, fuels and solvents
- Suitable for internal coating of mobile tanks and tanks and pipes that regularly contain water and aggressive liquids and solvents.
- Base and top paint with mechanical strength and high adhesion to steel and concrete.
- Anticorrosive prevents the development of rust.
- Resistant to alkaline solutions and mixed acids and abnormal humidity conditions.
- Used as a base and top color.
- Easy to apply and dries quickly.
- High coverage area.
- Resistant to fuels and oils including jet fuel, diesel, fuel oil.
- Resistant to continuous immersion in hot water of 60 degrees Celsius.
uses:
- As a base and top for interior painting of tanks and pipes that store and transport water, fuels, chemicals.
- For painting chemical tanks in chemical warehouses on a ship.
- For internal painting of electric and solar water boilers
- and for internal painting of fuel tanks and tankers for transporting fuels and chemicals.
- and for internal painting of feed tanks of water, chemicals and fuels.
- As a protective coating for the shaded construction of columns and the roof of buildings in a corrosive or very humid atmosphere.
Epoxyden Ship Phenolic PH top primer multi-thickness phenolic chemical resistant epoxy
Technical data:
- Cover – 1 liter per 5 square meters in a layer of 150 dry microns.
- Concealment capacity – 0.95 < in a layer of 58 microns.
- Flexibility – 1 mm (sheen)
- Density – Part A 1.35-1.45 gm/cm 3 , Part B 0.85-0.95 gm/cm 3 (1475 (ASTM D
- Viscosity – part A + part B immediately after mixing – 80 40 seconds 4#
- Stiffness – 10 Dg< (Ericsson)
- Flash point -38 o Celsius
- Amount of solids by volume – 75% (ASTM-D-2369)
- Abrasion – 120 micron – 5600 cycles (Gardner) ASTM
- Recommended layer thickness – 150 dry microns.
- Recommended number of layers – at least 2
- Drying time to the touch – up to 5 hours.
- Hard drying time – up to 16 hours.
- Pot life (working time from the moment of mixing A with B) – 4 hours. (After 4 hours the B+A mixture has a viscosity less than 70 seconds at #4, after 8 hours no gels will be formed)
- Mixing ratio A:B – 2.5:1 by volume.
- Waiting time after mixing and before starting to paint: 10 minutes and stir again with a mechanical mixer.
packing:
- 3.6+1.4= 5 liters. 13+5 = 18 liters.
This technical specification is for non-binding general information only. also
Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard.
Epoxyden Ship Phenolic PH top primer multi-thickness phenolic chemical resistant epoxy
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- Related article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- For a free consultation, call Denber VP Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- To the article Sealing also
- Epoxy floor coating in casting and painting also
- The complete article on the sealing materials for roofs and walls also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Lampert Denbergloss Clear also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794 also