Epoxyen floor in shades primer 1:1

Epoxyen floor in shades primer 1:1

Epoxy epoxyden floor base primer in shades for epoxy floors that penetrates concrete floors.

A red/grey epoxy primer with low viscosity that penetrates concrete, two-component, multi-solid, for painting a primer that penetrates concrete elements and floors. Tiny molecular size for penetrating deep into the concrete and creating a deep and strong foundation before coating with a top layer.

EPOXYDEN FLOOR PRIMER RED/GREY – DEEP PENETRATION PRIMER FOR CONCRETE FLOORS AND CONCRETE ELEMENTS BEFORE COATING TOP COAT

A special polyamide epoxy primer for concrete floors/walls/columns, extremely strong with a unique structure that is extremely small, manufactured in accordance with the requirements for a suitable primer as a low viscosity penetrating primer for concrete. The paint creates a strong base layer with high adhesion to the concrete parts. Also used as a primer or bridging layer over old epoxy/polyurethane paint that has hardened too hard on a concrete floor and before a new coating before painting with a top coat. Creates a base layer for concrete..

Characteristics:

Penetrates deep into the concrete (tiny molecular size) and creates a foundation for painting. Covers concrete floors/stairs/pillars with a foundation layer with mechanical strength and high adhesion.
Creates proper preparation for continued painting with flexible polyurethane epoxy paint or 100% solids flexible polyurethane paint or 100% solids epoxy.
Strengthens the concrete and fills “purim” prevents the release of gases and bubbles when pouring a top coating layer..
Excellent adhesion to the infrastructure. Also used as a bridging layer over old paint before painting with a top coat.
Gives opacity and extends the service period.

Uses:

For primer painting of floors and concrete elements before coating with epoxy or multi-thickness leveling polyurethane or painting with a UV-resistant Dunbargloss top paint.
As a base color for concrete structures and concrete stairs before painting.
As a base color for concrete blocks for anchoring light poles and electricity poles.
For primer painting for concrete walls before painting or plastering for concrete restoration.
As a base for polyurethane topcoats and others.
To strengthen the infrastructure before painting as an intermediate layer and a foundation for a new top layer of paint.

Epoxy epoxidan fluor base primer in shades for epoxy floors that penetrates concrete

Technical data:

Coverage – 1 liter per 4 square meters in a layer of 250 dry microns.
Flexibility – 1 mm (sheen)
Density – Part A 1.35-1.45 gm/cm ³ , Part B 0.85-0.95 gm/cm ³ (1475 (ASTM D
Viscosity – part A + part B immediately after mixing – 40 seconds 4#
Stiffness – 3 Dg< (Ericsson)
Flash point -38 ^o Celsius
Amount of solids – part A by volume 68%, part B by volume 52% (ASTM-D-2369)
% general solids by volume – 60%
Abrasion – 120 micron – 1560 cycles (Gardner) ASTM
Recommended layer thickness – 150-250 dry microns
Recommended number of layers – 1-2 according to the infrastructure for complete sealing
Pot life (working time from the moment of mixing A with B) – 4 hours. (After 4 hours the B+A mixture has a viscosity less than 70 seconds in #4, after 8 hours no gels will be formed)
Mixing ratio A:B – 1:1 by volume.

Packing:

2.5+2.5= 5 liters. 9+9 = 18 liters. and

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and

For the full specification: Epoxy primer for the floor in shades of epoxy flour primer in shades