4″ diamond disc for polishing concrete with a dust trap for connection to a vacuum cleaner.
4″ diamond sander for concrete and epoxy www.denber-paints.co.il
Diamond disc for polishing concrete and epoxy www.denber-paints.co.il
Rest tool for polishing surfaces before epoxy coating and after epoxy repair for alignment and smoothing.
Suitable for polishing floor corners where a large diamond polishing machine cannot reach.
Comes with a massive, comfortable handle and a dust trap to connect to a vacuum cleaner.
4″ diamond disc for polishing concrete with a dust trap for connection to a vacuum cleaner.
Characteristics:
- Strong and fast concrete and epoxy polishing.
- A dust-proof house with an outlet for connecting a vacuum cleaner.
- Easy to use manual.
- Lightweight.
- Rests for polishing corners of the floor where a large polishing machine does not fit.
Uses:
- For polishing a concrete floor before epoxy coating.
- Epoxy polishing for alignment and smoothing.
Technical data:
- single phase 220V
Application methods:
- attachment to the surface.
- Connection to a vacuum cleaner.
- Top handle grip.
- Activation and polishing.
Area preparation:
- Thorough cleaning of dust, grease, dirt and loose paint.
Storage:
- In a cool and shady place at room temperature.
Safety:
- Electrical product – do not wet with water. electrification danger.
- For professional use only.
- Do not operate the device in the air only when attached to the floor.
- out of reach of children.
- Away from sources of heat, fire and sparks.
- Ensure adequate ventilation during application.
- Wear safety glasses, dust mask, thick fabric gloves coated with metal, protective clothing.
- In case of injury – seek medical attention immediately.
Warning:
- During strenuous work, if the engine heats up, take a break to cool it down.
- It is mandatory and the customer’s responsibility to try and test compatibility first on a small area before applying on large areas.
- Avoid contact with the body can cause serious injury.
Quality Inspection:
- in our factory laboratories
- ISO 9001-2015
To the user’s attention:
this technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification is used as a substitute for advice/training by a consultant/authorized guide. It must be applied first on a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors Can be obtained by phone. Read the MSDS safety instructions of the product before starting work with it.
Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard
English
עברית
Русский