Denbergloss Clear two-layer polyurethane acrylic lacquer

Sun-resistant acrylic polyurethane varnish does not yellow

DENBERGLOSS CLEAR ACRYLIC UV RESIST LACQUER  POLYURETHANE TWO COMPONENT TOP COAT FOR  EXTERNAL USE, DURABILITY FOR HARD DEMANDS

Hard, glossy/matte/silk transparent top polyurethane varnish, smooth and durable decorative for exterior painting of all types of infrastructures and elements, walls and concrete, metal and other structures, for strong resistance to mechanical and chemical abrasion and particularly harsh climatic conditions. Very smooth, dust repellent, can be applied in several layers. Does not fade or disintegrate even with long exposure to the sun. Tested at the Ministry of Defense for UV resistance

Characteristics:

• Smooth and hard finish gives a look and is a substitute for mosaic or ceramic tiles.
• Flexible for bending and hard for abrasion.
• Very washable and repels dust and dirt.
• High hardness, suitable for painting items that come in contact with a lot of wear and tear.
• Strengthens the paint system against damage and scratches.
• Excellent adhesion to the infrastructure.
• Resistant to scratches and mechanical damage.
• Easy to apply.
• UV resistant, chemical resistant.
• Heat and cold resistance.
• Very high gloss or other on demand, durable for many years.
• quick drying.
• Does not contain cadmium, and contains lead up to 06% as permitted. Does not contain chromates.

uses:

• As an upper layer for planes – transport and passenger planes, fighter planes and helicopters.
• For painting aviation accessories and parts and ground equipment.
• Painting exterior walls of all kinds on a suitable epoxy base.
• For coating buildings in sunny areas.
• for UV protection for signs, paints, wooden products such as pergolas and garden furniture,
• For painting vehicles, and logistics tools (trains, agricultural equipment, cranes, carts and trailers, etc.).
• For coating parquet and thin floors, wind boxes, wooden furniture.

Sun-resistant acrylic polyurethane varnish does not yellow

Technical data:

• Theoretical coverage – 1 liter per 10-15 square meters.
• Practical consumption – 1 liter per 8 square meters.
• Recommended layer thickness 35-40 dry microns.
• Recommended wet layer thickness – 60 microns.
• And the thickness of 2 layers wet on wet is recommended – 120 microns
• Flexibility – 1 mm (sheen)
• Density – 0.9-1.1 gm/cm ³
• Stiffness – 10 Dg < (Ericsson)
• Abrasion – 120 microns – 3600 cycles (Gardner) ASTM
• Base to hard ratio – 2:1
• Shine at 60 ⁰ – glossy 80% <, silk 15-45%, matte 5% >
• Pot life = working time from the moment of mixing B+A – 6> hours.
• % solids by volume – shiny % 66.6
• The tourism test and radiation resistance under accelerated conditions for this product: 1,200 hours in a Q-Pannel with a UVA-340 lamp in cycles of 8 hours of light at a temperature of 60 0 ^and  4 hours at a temperature of 50 ⁰  , the color passed the test successfully with minimal color changes and without any damage in the mechanical properties. Tested according to ASTM D-4587-91 This test was conducted at the Ministry of Defense – Materials Laboratory and is attached to this specification.

Color:

• clear transparent

Gloss:

• Glossy, matte, silky.

Touch drying :

• 30-60 minutes.

Packing:

• 3.35+1.65 = 5 liters. 5+2.5 = 7.5 liters

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and

For the full specification:  two-layer UV-resistant acrylic lacquer Denbergloss Clear