Denbergloss Antistatic transparent/shades for painting floors

Denbergloss Antistatic transparent/shades

Denbergloss antistatic, transparent and in colors for painting floors, wear-resistant, electrically conductive, for floors and walls.

Antistatic paint for a transparent floor and in shades Danbergloss antistatic in shades for painting floors and walls – top polyurethane paint, two-component electrically conductive, unique, high electrical conductivity, for discharging static electricity on floors and in moving parts that create static electricity by friction, resistant to chemicals, resistant to oils and fuels, resistant to mechanical blows, abrasion Hard of dust, rain, hail and ice. UV resistant. Resistance 300-900 ohms in dark shades or 1-10 kilo ohms in light shades per meter. Can be ordered to fix antistatic conduction of 10 ⁴ -10 ⁸ Ohm. . (0.01-100 mega ohm)

DENBERGLOSS ANTISTATIC IN COLORS high conductivity polyurethane paint.

Denbergloss Antistatic transparent/shades www.denber-paints.co.il

Characteristics:

A high-quality electrical conductor that causes an antistatic electrical discharge that is created during movement and friction.
Strengthens and prevents abrasive dust.
Resistant to outdoor conditions.
Transparent and in shades.
and resistant to UV radiation
Resistant to chemicals and thinners.
And resistant in a thermal market up to 120 degrees Celsius. Resistant to constant heat up to 80 degrees Celsius.
High hardness to scratch and resistance to mechanical blows.
Low electrical resistance, high conductivity for abnormal, high and low electrical currents.
Two-component, for professional use.
Resistant to high inrush currents such as lightning, as well as differences in the intensity of electric currents.
Transparent and colored antistatic for floors – 10 ⁴ -10 ⁸ Ohm. ׁׂ

Uses:

Sealing floors in the electronics industry and in flammable and/or explosive industries.
Coating absorbent concrete surfaces in laboratories with equipment sensitive to static electricity.
For antistatic coating for walls and floors.

Danbergloss, antistatic, transparent and in colors for painting floors, wear-resistant, electrically conductive, for floors and walls.

Technical data:

Theoretical coverage – 1 liter per 10 square meters (wet layer 100 microns).
Flexibility – 1 mm (sheen)
Density – 1.15-1.45 gm/cm ³
Viscosity – 2-3 sec (HAAKE)
Stiffness – 10 Dg (Ericsson)
Hardness – 84 Shore A
Recommended layer thickness – 40-50 dry microns per layer.
The amount of conductive materials: 45-55%
Amount of solids – 65%
Adhesion – B5 (3359-78 ASTM D-)
Resistance – a strip 10 cm long and 1 cm wide and 100 microns thick dry – 1-3 kilo ohms on average for most shades. In black you can get 300-900 ohms. Can be ordered with a limited antistatic conductivity of 10 ^4-8 .
Number of layers for floors – 2 layers

Containing:

Elliptical polyurethane resin.
Melanins, electrical conduction components.
Special plasticizers.
Additives.

Color:

Cloudy transparent, light and dark gray, blue, light blue, black, cream, mustard, brown red, and more…

Gloss:

Matt. % 7 >
Silk 15-45%
Glossy 80-100%

Drying :

For contact – 0.5-1 hours, final – 6-8 hours, final difficulty – 5 days.

Application methods:

Brushing, rolling, spraying. and

Dilution:

Without

Area preparation:

Thorough cleaning of dust, grease, dirt and loose paint. and
Polishing and vacuuming. and
It is recommended to go over the surface with a cloth dipped in thinner or high-quality alcohol to ensure an area free of grease. For heavy greasy dirt, use degreaser M for high-quality degreasing. and

Primary color:

With no

Packing:

3.4+1.6 = 5 liters and

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and

For the full specification: transparent antistatic floor paint in Denbergloss shades