Cheap epoxy grout

Cheap epoxy grout

Epoxy grout for repairing floors

A three-component product for mixing and pouring into pits and/or recesses in a concrete or epoxy-coated floor. For leveling filling and leveling the floor. for anchoring machines.

Cheap epoxy grout. www.denber-paints.co.il

Cheap epoxy grout. www.denber-paints.co.il

Characteristics:

  • Can be cast in one thick layer with no thickness limit.
  • 100% solids, no solvent evaporation.
  • Smooth, very hard and scratch resistant.
  • Very washable and repels dust and dirt.
  • Resistant to harsh chemical substances without solvents for cleaning floors.
  • It can be cast thick on a suitable foundation, with the addition of part C to a mixture of quartz for grout to anchor machines in industry from vibrations or to fill holes in the floor.
  • High hardness, suitable for driving forklifts, cars, lifting equipment.
  • Excellent adhesion to any rigid infrastructure including concrete and steel and steel alloys with a suitable foundation.
  • It is easy to apply in casting as it has self-leveling ability.
  • Resistant to pesticides, industrial chemicals, oils and fuels.
  • Heat and cold resistance.
  • Resistant to unusual humidity and salinity conditions, many acids and bases.
  • Resistant to standing water even those with industrial waste for very long periods.
  • It can be repaired easily and the cost is low.
  • High electrical insulation.
  • Does not contain cadmium, lead, chromates.

Epoxy grout for repairing floors

Uses:

  • To repair fracture damage and subsidence of concrete and flooring in industry, garages, warehouses, food factories of all kinds, slaughterhouses, large kitchens, restaurants, public toilets, garbage rooms and compactors, etc.
  • For anchoring machine legs in industry to the floor, to prevent movement even during vibrations.
  • Coating floors and panels in bathrooms in general and public ones in particular, showers, etc.

Technical data:

  • Part A – can be mixed by hand easily and after 5 minutes you will get a uniform and smooth solution.
  • Part B – will be transparent and clear.
  • and part C – quartz aggregate for grout.
  • Storage durability – 24 hours at 57 0  without separation and spoilage,
  • Coverage – 1 liter per 1 square meter in a 1 mm layer, 3 liters per 1 square meter in a 3 mm layer.
  • To prepare grout – for mixture A + B of 5 liters 6 kg – additional part C – 15-10 kg quartz grout. Total 16-21 kg mixture
  • For mixture A + B = 15 liters 18 kg – addition part C quartz grout 30-45 kg. Total 48-63 kg
  • Recommended layer thickness – no limit.
  • Flexibility – 4 mm (sheen)
  • Density of parts A + B – 1.0-1.1 g/cm 3 for transparent, 1-1.3 gm/cm 3   for colored.
  • % solids – 100%
  • Ratio of base to hardener – 2:1 3.4 kg of base + 1.6 kg of hardener + 10 kg of quartz grout
  • Flash point part A – 255 degrees, part B – 166 degrees.
  • Stiffness – >10 Dg (Ericsson)
  • Bending resistance – 30 newtons per square meter
  • Drag resistance – 15.8 newtons per square meter
  • Average viscosity A+B– cPs 12,000-15,000 (Brookfield)
  • Compression resistance – 800 kg per square meter
  • Pot life = working time from the moment of mixing B+A – 15-30 minutes.

Epoxy grout for repairing floors

Packing:

  • 3.4+1.6 = 5 liters = 6 kg + 10 kg quartz for grout = 16 kg mixture
  • 5+2.5 = 7.5 liters = 9 kg + 15 kg quartz for grout = 24 kg mixture
  • 10+5= 15 liters = 18 kg + 30 kg quartz for grout = 48 kg mixture

This technical specification is for  non-binding general information only. also

Manufactured by  Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard. also

For the full specification:  cheap epoxy grout for repairing floors for contractors

Epoxy grout for repairing floors